408-32128 Datasheet, PDF (2/2 Pages) TE Connectivity Ltd – AMP+ HVA280

408-32128
2. Apply pressure to collet until it is fully seated in the collet tool. Full insertion is achieved when the
orange collet flange is against the tool flange as shown in Figure 3. The longer the collet is left in the
tool, the more “set” the collet fingers will retain.
Figure 3
3. Remove the collet from the tool and apply to cable as required. See Figure 4.
3. REVISION SUMMARY
 Initial release of document
Figure 4
Rev A
2 of 2