408-32029 Datasheet, PDF (2/2 Pages) TE Connectivity Ltd – Removal Tool Kit 2161844-1

408-32029
Figure 2
5. MAINTENANCE AND INSPECTION
6. REPLACEMENT AND REPAIR
TE Connectivity recommends that the tool be
inspected immediately upon its arrival to ensure that it
has not been damaged during shipment.
Order tools through your TE Representative, or call 1-
800-526-5142, or send a facsimile of your purchase
order to 717-986-7605. or write to:
5.1. Daily Maintenance
It is recommended that each operator be made aware
of, and responsible for, the following steps of daily
maintenance:
• Remove dust, moisture, and other contaminants
with a clean, soft brush, or lint-free cloth. DO NOT
use objects that could damage the tool or any of its
components.
• When the tool is not in use, store it in a clean, dry
area.
CUSTOMER SERVICE (038-035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105-3608
7. REVISION SUMMARY
Since the previous release, Figure 1 and Figure 2
were revised.
5.2. Periodic Inspection
Regular inspections should be performed by quality
control personnel. A record of scheduled inspections
should remain with the tool or be supplied to personnel
responsible for the tool. The inspection frequency
should be based on the amount of use, working
conditions, operator training and skill, and established
company standards.
Rev B
2 of 2