English
Language : 

V23134-F4 Datasheet, PDF (1/4 Pages) TE Connectivity Ltd – Automotive Relays Plug-in Mini ISO Relays
Automotive Relays
Plug-in Mini ISO Relays
Power Relay F4
n Pin assignment similar to ISO 7588 part 1
n Plug-in or PCB terminals
n Also available for 42VDC applications
Customized versions on request
– 24VDC versions with contact gap >0.8mm
– Integrated components (e.g. resistor, diode)
– Customized marking/color
– Special covers (e.g. notches, release features, brackets)
– Various contact arrangements and materials
– For latching (bistable) version refer to Power Relay F7 A Latching
 or Mini Relay Latching
– For shrouded/weatherproof dust cover versions refer to
Shrouded Power Relay F4 A and VF4 A
F134co_fcw1
Typical applications
Cross carline up to 40A for example: ABS control, blower fans, car alarm,
cooling fan, Electric Power Steering, energy management, engine control,
fuel pump, heated front screen, lamps: front, rear, fog light, main switch/
supply relay, valves, wiper control.
Contact Data
Contact arrangement
1 form A, 1 NO/1 NO (2x87) 1 form U, 2 NO
1 form C, 1 CO
Contact gap
>0.8mm
Rated voltage
12VDC 24VDC
12VDC 24VDC
12VDC
24VDC
24VDC1)
Limiting continuous current
NO NO
NO
NO
NO/NC
NO/NC
NO/NC
23°C
60A 60A
2x32A 2x32A
60/45A
60/45A
60/45A
85°C
40A 40A
2x25A 2x25A
40/30A
40/30A
40/30A
125°C
17A 17A
2x11A 2x11A
17/12A
17/12A
17/12A
Limiting making current2)
NO/NC
120A 120A
2x100A 2x100A
120/45A
120/45A
120/45A
Limiting breaking current
NO/NC
60A 20A
2x40A 2x15A
60/40A
20/15A
30/20A
Limiting short-time current
overload current, ISO 8820-33):
1.35 x 40A, 1800s 1.35 x 40A, 1800s 1.35 x 40A, 1800s
2.00 x 40A, 5s 2.00 x 40A, 5s
2.00 x 40A, 5s
3.50 x 40A, 0.5s 3.50 x 40A, 0.5s
3.50 x 40A, 0.5s
6.00 x 40A, 0.1s 6.00 x 40A, 0.1s
6.00 x 40A, 0.1s
Jump start test
ISO 16750-1 24VDC for 5min conducting nominal current at 23°C
Contact material silver based
Min. recommended contact load4) 1A at 5VDC
Initial voltage drop
NO contact at 10A, typ./max.
15/200mV 15/200mV
2x15/200mV 2x15/200mV
15/200mV 15/200mV 15/200mV
NC contact at 10A, typ./max.
20/250mV 20/250mV 20/250mV
Frequency of operation
at nominal load 6 ops./min (0.1Hz)
Operate/release time typ. 7/2ms5)
Electrical endurance
resistive load at 14VDC
>2x105 ops. >2x105 ops.
>2x105 ops.
40A
2x25A
40A (NO)
resistive load at 28VDC
>1x105 ops.
>1x105 ops.
>1x105 ops. 1x105 ops.
20A
2x15A
20A (NO) 30A (NO)
>5x105 ops.
10A (NC)
Mechanical endurance
DC coil >1x107ops.
1) Special high performance 24VDC version with contact gap >0.8mm.
2) The values apply to a resistive or inductive load with suitable spark suppression and at maximum 14VDC for 12VDC or 28VDC for 24VDC load voltages. For a load current duration of
maximum 3s for a make/break ratio of 1:10.
3) Current and time are compatible with circuit protection by a typical automotive fuse. Relay will make, carry and break the specified current.
4) See chapter Diagnostics of Relays in our Application Notes or consult the internet at http://relays.te.com/appnotes/
5) For unsuppressed relay coil. A low resistive suppression device in parallel to the relay coil increases the release time and reduces the lifetime caused by increased erosion and/or higher
risk of contact tack welding.
03-2014, Rev. 0314
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
1
Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-
terms of the disclaimer and all chapters of
tion, application notes and all specifications
the ‘Definitions’ section, available at
are subject to change.
http://relays.te.com/definitions