T9E Datasheet, PDF (1/3 Pages) TE Connectivity Ltd – PCB and PCB/quick connect terminals

General Purpose
High Power PCB Relays
Power PCB Relay T9E
n 1 pole 30A, 1 formA(NO) or 1 formC(CO)
n High breaking capacity 7500 VA
n PCB and PCB/quick connect terminals
n UL class F insulation as standard
n Ambient temperature up to 105°C
n Plastic materials according to IEC60335-1
Typical applications
HVAC, power supplies, domestic appliances, measurement and control.
Potter & Brumfield
Approvals
VDE 40027903, UL E58304
Technical data of approved types on request.
Contact Data
Contact arrangement
1 form A (NO) 1 form C (CO)
Rated voltage
240VAC
Max. switching voltage 250VAC (VDE); 300VAC (UL)
Rated current
30A
20A/10A
Limiting continuous current
30A
Breaking capacity max.
7500VA 5000/2500VA
Contact material
AgSnOInO (AgCdO optional)
Min. recommended contact load
1A, 5VDC or 12VAC
Initial contact resistance
75 mΩ at 1A at 5VDC or 12VAC
Frequency of operation, with/without load
6/120min^-1
Operate/release time max., including bounce 15/15ms
Contact ratings
Type Contact
Load
IEC 61810
AgSnOInO, 1W coil
1
NO
30A, 250VAC, cosj=1, 60°C
1
NO
20A, 250VAC, cosj=1, 85°C
2
NO
20A, 250VAC, cosj=1, 70°C
1, 2 CO
20A / 10A, 250VAC, cosj=1, 60°C
AgSnOInO, 900mW coil
1
NO
17A, 250VAC, cosj=1, 105°C
1
NO
20A, 250VAC, cosj=1, 85°C
EN 60730-1
AgSnOInO, 1W coil
1
NO
12(12)A, 240VAC, 60°C
UL 508 1)
AgSnOInO, 1W coil
1, 2 NO
30A, 240VAC, general purpose, 25°C
AgSnOInO, 900mW coil
1, 2 NO
TV-8, 125VAC, 25°C
1) Additional UL 508 ratings are available.
Cycles
20x10³
100x10³
100x10³
20x10³
100x10³
100x10³
100x10³
100x10³
25x10³
Mechanical endurance
Coil Data
Coil voltage range
Max. coil power
Max. coil temperature
Coil insulation system according UL
10x10⁶ ops.
6 to 110VDC
110% of nominal
155°C
Class F
Coil Data (continued)
Coil versions, DC coil
Coil
Rated
Operate Release
Coil
Rated coil
code
voltage
voltage
voltage resistance power
VDC
VDC
VDC
Ω±10%
W
Code D (1W) coil
6
6
4.5
0.6
36
1
9
9
6.75
0.9
81
1
12
12
9
1.2
144
1
18
18
13.5
1.8
324
1
22
22
16.5
2.2
484
1
24
24
18
2.4
576
1
48
48
36.2
4.8
2304
1
110
110
82.5
11
12100
1
Code L (900mW) coil
6
6
4.5
0.6
40
.9
12
12
9
1.2
155
.9
18
18
13.5
1.8
380
.9
24
24
18
2.4
660
.9
All figures are given for coil without preenergization, at ambient temperature +23°C.
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
Initial surge withstand voltage
1500V_rms
2500V_rms
between contact and coil 6kV (1.2μs/50μs impulse wave)
Initial insulation resistance
between insulated elements
1x10⁹Ω
Clearance/creepage
between contact and coil
≥3mm/4mm
02-2014, Rev. 0214
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Coil operating ranges shown above are for 1W coils.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
1
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.