SNR Datasheet, PDF (1/2 Pages) Tyco Electronics – Slim PCB Relay

General Purpose Relays
Accessories
Accessories Slim Interface Relay SNR
n Module width 6.2 mm
n Reduced system width for increased packing density
on the DIN rail
n DC and AC version
n Electrical indicator as standard (LED)
n Protection circuit
n Screw- or cage clamp terminals
n Jumper bars
SCHRACK
Approvals
VDE Cert. No. 40010063, cULus E224918
Technical data
ST3F/ST4F
Rated voltage/Max. switching voltage AC
240/400 VAC
Rated current
6A
Dielectric strength coil-contact circuit
4000 V_rms
Clearance / creepage coil-contact circuit
≥ 6/8 mm
Material group of insulation parts
IIIa
Insulation to IEC 60664-1
Type of insulation coil-contact circuit
reinforced
open contact circuit
functional
Rated insulation voltage
250 V
Pollution degree
2
Rated voltage system
230/400 V
Overvoltage category
III
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature range
-20…+55˚C
Terminals
screw / cage clamp
Terminal screw torque acc. IEC 61984
0.5 Nm
max.
0.6 Nm
Wire cross section
single wire
0.14...2.5 mm²
fine wire
0.14...2.5 mm²
with bootlace crimp (DIN 46228/1)
0.14...2.5 mm²
Insertion cycles
A (10)
Max. Insertion Force total
100 N
Mounting distance ≥ 0 mm, dense packing
Weight
26 g
Packaging unit
10 pcs
F0260-B
Z
S0487-AA
Sockets
Product code
Part Number
ST 3F LC4 DIN-rail socket 24VDC, for relays 2-1416100-0

12/24/48 VDC, with LED, protection

and polarity diode, screw terminals
ST 3F SM5 DIN-rail socket 115VAC/VDC with 2-1416100-1

LED and protection circuit,

screw terminals
ST 3F TP0 DIN-rail socket 230VAC/VDC with 2-1416100-2

LED and protection circuit,

screw terminals
ST 4F LC4 DIN-rail socket 24VDC, for relays 2-1416100-3

12/24/48 VDC, with LED, protection

and polarity diode, cage clamp terminals
ST 4F SM5 DIN-rail socket 115VAC/VDC with 2-1416100-4

LED and protection circuit,

cage clamp terminals
ST 4F TP0 DIN-rail socket 230VAC/VDC with 2-1416100-5

LED and protection circuit,

cage clamp terminals
Version with
screw terminals
S0487-AA
Version with
cage clamp terminals
10-2014, Rev. 1014
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
1
Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-
terms of the disclaimer and all chapters of
tion, application notes and all specifications
the ‘Definitions’ section, available at
are subject to change.
http://relays.te.com/definitions