RTH Datasheet, PDF (1/2 Pages) TE Connectivity Ltd – 5kV/10mm coil-contact

General Purpose
Low Power PCB Relays
Power PCB Relay RTH 105°C 16A
n 1 pole 16A, 1 form C (CO) or 1 form A (NO) contact
n Ambient temperature 105°C
n Sensitive coil 400mW
n 5kV/10mm coil-contact
n Reinforced insulation
n WG version: Product in accordance to IEC 60335-1
SCHRACK
Typical applications
Oven control, cooking plate control.
Approvals
VDE Cert. No. 40007571, UL E214025, cCSAus 1142018
Technical data of approved types on request.
Contact Data
Contact arrangement 1 form C (CO) or 1 form A (NO)
Rated voltage
250VAC
Max. switching voltage
400VAC
Rated current
16A¹⁾
Limiting continuous current, form A/form B
16 / 26A
Limiting making current (form A contact)
max. 4 s, duty factor 10 %
30A
Breaking capacity max.
4000VA
Contact material
AgNi 90/10
Frequency of operation, with/without load
360/72000h^-1
Operate/release time max.
8/6ms
Bounce time max., form A/form B
4/6ms
Contact ratings
Type
Contact
Load
Cycles
IEC 61810
RTH14 A (NO)
10A, 250VAC resistive,105°C
150x10³
RTH14 C (CO)
16A, 250VAC resistive, 105°C
10x10³
RTH14 B (NC)
26A, 250VAC resistive, 85°C
500
RTH34 A (NO)
10A, 400VAC resistive, 105°C
150x10³
RTHH4 A (NO)
10A, 250VAC resistive, 105°C
250x10³
UL 508
RTH14 A/B (NO/NC) 16A, 250VAC, resistive, 105°C
30x10³
RTH34 A (NO)
20A, 250VAC, general purpose, 105°C 6x10³
Mechanical endurance
>30x10⁶ operations
1) Continuous thermal load >10A at 105°C requires reduction of coil power to 64% of
rated power after 100ms.
Zb
Coil Data
Coil voltage range
5 to 60VDC
Operative range, IEC 61810
Coil insulation system according UL1446
90...110% U_RTD
class F
Coil versions, DC coil
Coil
Rated
Operate Release
Coil
Rated coil
code
voltage
voltage
voltage resistance power
VDC
VDC
VDC
Ω±10%
mW
009
9
6.3
0.9
203
399¹⁾
012
12
8.4
1.2
360
400¹⁾
024
24
16.8
2.4
1440
400¹⁾
1) Continuous thermal load > 10 A at 105°C requires reduction of coil power to 64% of
rated power after 100ms.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
Clearance/creepage
between contact and coil
Material group of insulation parts
Tracking index of relay base
1000V_rms
5000V_rms
≥10/10mm
IIIa
PTI250V
10-2014, Rev. 1014
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
1
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.