RT1-DC Datasheet, PDF (1/3 Pages) TE Connectivity Ltd – Power PCB Relay RT1 DC and AC

General Purpose
Low Power PCB Relays
SCHRACK
Power PCB Relay RT1 DC and AC (for Asia/Pacific markets)
n 1 pole 12A/16A, 1 form C (CO) or 1 form A (NO) contact
n Sensitive coil 400mW
n 5kV/10mm coil-contact, reinforced insulation
n Ambient temperature 85°C
n WG version: product in accordance to IEC 60335-1
Typical applications
Boiler control, timers, garage door control, POS automation, interface
modules.
Zb
Approvals
VDE Cert. No. 40007571, UL E214025, cCSAus 1142018
Technical data of approved types on request.
Contact Data
12A
16A
Contact arrangement 1 form C (CO) or 1 form A (NO)
Rated voltage
250VAC
Max. switching voltage
400VAC
Rated current
12A
16A
Limiting continuous current
12A
16A, UL: 20A
Limiting making current
max. 4s, duty factor 10%
25A
30A
Breaking capacity max.
3000VA
4000VA
Contact Material
AgNi 90/10
Frequency of operation, with/without load
360/72000h^-1
Operate/release time max., DC coil
8/6ms
Bounce time max., DC coil, form A/form B
4/6ms
Contact ratings
Type
Contact
Load
Cycles
IEC 61810
RT314 DC-coil A (NO)
16A, 250VAC, cosφ=1, 85°C
30x10³
RT314 DC-coil C (CO)
16A, 250VAC, cosφ=1, 85°C
10x10³
RT314 DC-coil A (NO)
10A, 400VAC, cosφ=1, 85°C
150x10³
RT114 DC-coil A (NO)
12A, 250VAC, cosφ=1, 85°C
50x10³
RT114 AC-coil A (NO)
12A, 250VAC, cosφ=1, 70°C
100x10³
UL 508
RT314
A/B (NO/NC) 20A, 250VAC, general purpose, 85°C 6x10³
RT334
A (NO)
16A, 250VAC, gen. purpose, 85°C 50x10³
RT314
A (NO)
1hp, 240VAC, 40°C
1x10³
EN60947-5-1
RT314 DC-coil A/B (NO/NC) 2A, 24VDC, DC13
6.050
EN60730-1
RT314 DC-coil A (NO)
12(2)A, 250VAC, 85°C
100x10³
Mechanical endurance
>30x10⁶ operations
Coil Data
Coil voltage range
Operative range, IEC 61810
Coil insulation system according UL
5 to 110VDC
2
class F
Coil versions, DC coil
Coil
Rated
Operate Release
Coil
Rated coil
code
voltage
voltage
voltage resistance power
VDC
VDC
VDC
Ω±10%
mW
005
5
3.5
0.5
62
403
006
6
4.2
0.6
90
400
009
9
6.3
0.9
200
400
012
12
8.4
1.2
360
400
024
24
16.8
2.4
1440
400
048
48
33.6
4.8
5520
417
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
Clearance/creepage
between contact and coil
Material group of insulation parts
Tracking index of relay base
1000V_rms
5000V_rms
≥10/10mm
IIIa
PTI 250V
10-2014, Rev. 1014
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
1
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.