RPII-2 Datasheet, PDF (1/2 Pages) TE Connectivity Ltd – 2 pole 8 A, 2 form C (CO) or 2 form A (NO) contacts

General Purpose Relays
PCB Relays
Power PCB Relay RPII/2
n 2 pole 8 A, 2 form C (CO) or 2 form A (NO) contacts
n 4 kv/8 mm coil contact
n Twin contacts available
SCHRACK
Applications
Domestic appliances, UPS
Approvals
VDE Cert. No. 40025448, UL E214024
Technical data of approved types on request
Contact Data
Contact configuration

Rated voltage / max.switching voltage AC
Max. switching voltage
Rated voltage
Limiting making capacity, max 4 s, duty factor 10%
Breaking capacity max.
Contact material

Frequency of operation with / without load
Operate/release time typ.
Bounce time typ., form A/form B
2 form C (CO) or
2 form A (NO)
250 VAC
400 VAC
8 A (UL: 10A)
14 A
2000 VA
AgCdO,
AgNi0.15 gold flashed
600 / 72000 h^-1
9/3 ms
2/3 ms
Contact ratings
Type
Contact
IEC61810
RP420/421 A (NO)
RP420
A (NO)
UL508
RP420
C (CO)
Load
8A, 250 VAC, resistive, 35°C
5A, 250 VAC, resistive, 70°C
10A, 250 VAC, gen. purp, 70°C
Cycles
100x10³
30x10³
6x10³
Coil Data
Coil voltage range
Operative range, IEC 61810
Z
F0150-B
5 to 110VDC
2
Coil versions, DC coil
Coil
Rated
Operate Release
Coil
Rated coil
code
voltage
voltage
voltage resistance power
VDC
VDC
VDC
Ω±10%¹⁾
mW
005
5
3.5
0.5
54
500
006
6
4.2
0.6
68
500
012
12
8.4
1.2
270
500
024
24
16.8
2.4
1100¹⁾
500
048
48
33.6
4.8
4400¹⁾
500
060
60
42.0
6.0
6540¹⁾
500
110
110
77.0
11.0
23100¹⁾
500
1) Coil resistance ±15%.
All figures are given for coil without pre-energization, at ambient temperature +20°C.
Other coil voltages on request.
Insulation Data
Initial dielectric strength
coil-contact circuit 4000V_rms
open contact circuit 1000V_rms
adjacent contact circuits 2500V_rms
Clearance/creepage
coil-contact circuit ≥8/8mm
Material group of insulation parts IIIa
04-2015, Rev. 0415
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
1
Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-
terms of the disclaimer and all chapters of
tion, application notes and all specifications
the ‘Definitions’ section, available at
are subject to change.
http://relays.te.com/definitions