ORWH Datasheet, PDF (1/3 Pages) TE Connectivity Ltd – Compact relay with 1 Form A and 1 Form C contact arrangement

General Purpose Relays
PCB Relays
Miniature PCB Relay ORWH
n Compact relay with 1 Form A and 1 Form C contact arrangement
n 10A switching capacity
n Flux proof or sealed type available
n 6kV dielectric strength type available
SCHRACK
Typical applications
Appliances, HVAC, emergency lighting
Approvals
UL E82292, TUV R50138967
Technical data of approved types on request
Contact Data
Contact arrangement
1 form A, 1 NO

1 form C, 1 CO
Rated voltage
28VDC, 277VAC
Max. switching voltage
28VDC, 277VAC
Rated current
10A
Contact material AgZnO, AgCdO, AgNi
Min. recommended contact load
100mA, 5VDC
Frequency of operation
600 ops./h
Operate/release time max.
10ms/5ms
Electrical endurance
AgZnO: form A, 10A, 250VAC, res., +85°C, Class B or F only 100x10³ ops.
AgCdO: form A, 10A, 250VAC, res., +85°C, Class B or F only 50x10³ ops.
AgNi: form A, 10A, 250VAC, res., +85°C, Class B or F only 50x10³ ops.
Contact ratings, form A/form B 10A/6A 250VAC resistive
10A/6A 28VDC resistive
Mechanical endurance, DC coil
10x10⁶ operations
Coil Data
Coil voltage range
Operative range, IEC 61810
Coil insulation system according UL
3 to 48VDC
2
Class A, B, F
Coil versions, DC coil
Coil
Rated
Operate Release
Coil
Rated coil
code
voltage
voltage
voltage resistance power

VDC
VDC
VDC
Ω±10 %
mW
003
3
2.1
0.3
25
360
005
5
3.5
0.5
70.0
360
006
6
4.2
0.6
100
360
009
9
6.3
0.9
225
360
012
12
8.4
1.2
400
360
024
24
16.8
2.4
1600
360
048
48
33.6
4.8
6400
360
All figures are given for coil without pre-energization, at ambient temperature +23°C
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
Clearance/creepage
between open contacts
between contact and coil
Clearance/creepage
between open contacts, standard type
for 6kV dielectrial strength type
between contact and coil, standard type
for 6kV dielectrial strength type
Zt
750V_rms
1500V_rms
>1.6mm
>3.2mm
>1.6mm
>4mm
>3.2mm
>4mm
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content

refer to the Product Compliance Support Center at

www.te.com/customersupport/rohssupportcenter
Ambient temperature
-30°C to +70°C
Category of environmental protection
IEC 61810 RTII - dust protected

RTIII - wash tight
Weight
9.5g
Resistance to soldering heat THT
IEC 60068-2-20
RTII: 270°C/10s

RTIII: 260°C/5s
Packaging/unit tube/25, carton box/1000
Accessories
Product Code Description
27E1064
Socket, rated 10A at 300VAC. UL Recognized for US

and Canada. Designed to fit same suggested board

layout as relay.
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
1
Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-
terms of the disclaimer and all chapters of
tion, application notes and all specifications
the ‘Definitions’ section, available at
are subject to change.
http://relays.te.com/definitions