MS5536C Datasheet, PDF (1/19 Pages) Intersema Sensoric SA – SMD Gage Pressure MODULE

MS5536C
SMD Gage Pressure Module
SPECIFICATIONS
 Pressure range -400 to 1000 mbar
(Optional -1000 to 400 mbar)
 0.1 mbar Resolution
 Factory Calibrated (coefficients for software
compensation store on-chip)
 3-wire serial interface
 Low voltage / low power
MS5536C is a family of high-resolution factory calibrated
pressure sensors. The devices include a piezoresistive pressure
sensor and an ADC-Interface IC. The 3-wire serial interface
ensures simple communication with any microcontroller. The
devices provide digital pressure and temperature information as
16-Bit data word each. In addition 64-Bit of individually calibrated
compensation coefficients are stored allowing for a highly
accurate software compensation of process spread and
temperature effects.
The devices have a very low standby current and automatically
enter power down mode after each conversion. The optimum
compromise of refresh rate and average current consumption can
be defined by the application software.
SENSOR SOLUTIONS /// MS5536C
09/2015
Page 1