KUP93 Datasheet, PDF (1/2 Pages) TE Connectivity Ltd – Contact arrangement to 3PDT

Catalog 1308242
Issued 11-15
P&B
Features
• AC coils 24, 120 & 240V 50/60 Hz.; DC 12 & 24VDC.
• Contact arrangement to 3PDT.
• Sockets available for all models.
• Accepted pin pattern for HVAC industry.
• Primarily designed for the HVAC industry.
Contact Data @ 25°C
Material: Fine silver or silver-cadmium oxide.
KUP93 series
General Purpose
3 to 10 Amp, Multicontact
AC or DC Relay
File E22575
File LR15734
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that users also seek out the pertinent approvals files
of the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Coil Data
Nominal
Voltage
DC
12
Coils
24
AC
Coils
24
120
240
*AC coils, ± 15%
DC
Resistance
in Ohms
± 10%*
120
472
72
1,700
7,200
Must
Operate
Voltage
9.0
18.0
20.4
102.0
204.0
Nominal
Coil
Current
(mA)
100
51
115
24
12
Contact rating
Material
UL/CSA Ratings
Fine silver
5A @ 28VDC or 240VAC, 80% PF, 1/10
HP @ 120VAC, 1/4 HP @ 240VAC
10A @ 28VDC or 240VAC, 80% PF,
Silver cadmiun 1/4 HP @ 120VAC, 1/3 HP @ 240 VAC
oxide
10 FLA, 30 LRA @ 120 VAC, 5 FLA,
15 LRA @ 240 VAC
Life
Expected
100,000
100,000
30,000
Operate Data @ 25°C
Must Operate Voltage:
DC Coils: 75% of nominal voltage or less.
AC Coils: 85% of nominal voltage or less.
Operate Time (Excluding Bounce): 15 milliseconds, typical,

at nominal voltage.
Release Time (Excluding Bounce):
DC Coils: 10 milliseconds, typical, at nominal voltage.
AC Coils: 10 milliseconds, typical, at nominal voltage.
Initial Dielectric Strength
Between Open Contacts: 500V rms.
Between Adjacent Contacts: 1,500V rms.
Between Contacts and Coil: 1,500V rms.
Environmental Data
Temperature Range:
Storage:
All Coils: -45°C to +105°C.
Operating:
DC Coils: -45°C to +70°C.
AC Coils: -45°C to +45°C.
Coil Data @ 25°C
Nominal Power:
DC Coils: 1.2 Watts.
AC Coils: 2.7VA.
Initial Insulation Resistance: 100 megohms, min., at 25°C.r
Dimensions are shown for
reference purposes only.N
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Mechanical Data
Termination: .187” x .020” quick connect.
Enclosures: Clear polycarbonate dust cover.
Weight: 3.0 oz. (86g) approximately.Ñ
Specifications and availability
subject to change.
www.te.com
Technical support:
731
Refer to inside back cover.