|
K44P Datasheet, PDF (1/1 Pages) TE Connectivity Ltd – K44P Make & Break Load Switching-8 kV Relays | |||
|
KILOVAC High Voltage Relays
K44P Make & Break Load Switching â 8 kV Relays
Product Facts
n Single pole, single throw
contacts with latching
actuator
n Vacuum dielectric for power
switching low current loads
n 20 G vibration rating
n Carries 50 Amps at DC
n Space rated versions
available
n Meets requirements of
MIL-R-83725
Product Specifications
Contact Arrangement â
SPST-Latching
Contact Form â P
Test Voltage, DC or 60 Hz (Peak) â
10 kV
Rated Operating Voltage (Peak) â
DC or 60 Hz â 8 kV
2.5 MHz â 7 kV
16 MHz â 6 kV
32 MHz â 4 kV
Continuous Carry Current, Max. â
DC or 60 Hz â 50 A
2.5 MHz â 40 A
16 MHz â 25 A
32 MHz â 20 A
Coil Hi-Pot (Vrms, 60 Hz) â 500 A
Contact Capacitance â
Between Open Contacts â 2.5 pF
Open Contacts to Ground â 2.8 pF
Contact Resistance, Max. â
0.01 ohm
Operate Time, Max. â 5 ms
Release Time, Max. â N/A
Shock, 11ms, 1/2 Sine (Peak) â
50 g
Vibration â
Peak â 20 g (55 to 2000 Hz)
Operating Ambient Temperature
Range â -55°C to +85°C
Mechanical Life â 1 million cycles
Weight, Nominal â
59.53 g (2.1 oz.)
Coil Data
Volts, Nominal
26.5 Vdc
Latch & Reset, Max. 23 Vdc
Dropout
N/A
Coil Resistance (±10%) 155 â¦
Ratings listed are for 25°C, sea level
conditions
Ordering Information
Sample Part Number ᮣ
K44 P 3 3 4
Series:
Contact Form:
P = SPST-Latching
Coil Voltage:
3 = 26.5 Vdc, Bus Wire
High Voltage Connections:
3 = Solder Connection
Mounting:
2 = Flanged
4 = Standard
*See page 7-87 for mounting methods.
For factory-direct application assistance,
dial 800-253-4560, ext. 2055, or
805-220-2055.
7â66
Catalog 5-1773450-5
Revised 3-13
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
|