K40P Datasheet, PDF (1/1 Pages) TE Connectivity Ltd – KILOVAC High Voltage Relays

KILOVAC High Voltage Relays
K40P Make & Break Load Switching — 5.0 kV Relays
Product Facts for K40P
n Vacuum dielectric for power
switching low current loads
n Fast, 1 millisecond operate
time
n Long life: 10 million cycles
n 35 Amps continuous current
rating at DC; 8 Amps at 32
MHz
n Ideal for high power
antenna couplers
n Meets requirements of
MIL-R-83725
Product Facts for K40P364
n Double sided terminals for
ease of connection to bus
bar
n Vacuum dielectric for power
switching low current loads
n Fast switching, high current
capabilities
n Small and lightweight
Product Specifications
Contact Arrangement —
SPST-Latching
Contact Form — P
Test Voltage, DC or 60 Hz (Peak) —
6 kV
Rated Operating Voltage (Peak) —
DC or 60 Hz — 5 kV
2.5 MHz — 4.5 kV
16 MHz — 3.5 kV
32 MHz — 2.8 kV
Continuous Carry Current, Max. —
DC or 60 Hz — 35 A
2.5 MHz — 21 A
16 MHz — 14 A
32 MHz — 8 A
Coil Hi-Pot (Vrms, 60 Hz) — 500 A
For factory-direct application assistance,
dial 800-253-4560, ext. 2055, or
805-220-2055.
Contact Capacitance —
Between Open Contacts — 1.2 pF
Open Contacts to Ground — 1.2 pF
Contact Resistance, Max. —
0.02 ohm
Operate Time, Max. — 1 ms
Release Time, Max. — N/A
Shock, 11ms, 1/2 Sine (Peak) —
50 g
Vibration —
Peak — 30 g (55 to 2000 Hz)
Operating Ambient Temperature
Range — -55°C to +125°C
Mechanical Life —10 million cycles
Weight, Nominal —
28.35 g (1.0 oz.)
Coil Data
Volts, Nominal
26.5 Vdc
Reset & Latch, Max. 16 Vdc
Dropout
N/A
Coil Resistance (±10%) 80 Ω
Ratings listed are for 25°C, sea level
conditions.
Ordering Information
Sample Part Number ᮣ
K40 P 3 3 2
Series:
Contact Form:
P = SPST-Latching
Coil Voltage:
3 = 26.5 Vdc, Bus Wire
High Voltage Connections:
3 = Solder Connection
6 = Double Sided Solder Connection
Mounting:*
2 = Flanged
4 = Standard
*See page 7-87 for mounting methods.
Catalog 5-1773450-5
Revised 3-13
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters USA: [phone]
unless otherwise specified. Asia Pacific: [phone]
UK: [phone]
For additional support numbers
please visit www.te.com
7
7–61