H-26 Datasheet, PDF (1/1 Pages) Tyco Electronics – Make & Break Load Switching

KILOVAC High Voltage Relays
H-26 Series Make & Break Load Switching — 15 kV Relays
Product Facts
n Highly reliable four pole
double throw relay
n Used to switch multiple
loads and for polarity
reversal
n Vacuum dielectric for power
switching low current loads
n Meets requirements of
MIL-R-83725
Product Specifications
Contact Arrangement — 4PDT
Contact Form — 4C
Test Voltage, DC or 60 Hz (Peak) —
17 kV
Rated Operating Voltage (Peak) —
DC or 60 Hz — 15 kV
2.5 MHz — 12 kV
16 MHz — 10 kV
32 MHz — 7 kV
Continuous Carry Current, Max. —
DC or 60 Hz — 30 A
2.5 MHz — 10 A
16 MHz — 6 A
32 MHz — 4 A
Coil Hi-Pot (Vrms, 60 Hz) — 500 A
Contact Capacitance —
Between Open Contacts — 1 pF
Open Contacts to Ground — 2.5 pF
Contact Resistance, Max. —
0.02 ohm
Operate Time, Max. — 30 ms
Release Time, Max. — 30 ms
Shock, 11ms, 1/2 Sine (Peak) —
30 g
Vibration —
Peak — 10 g (55 to 500 Hz)
Operating Ambient Temperature
Range — -55°C to +125°C
Mechanical Life — 100,000 cycles
Weight, Nominal — 340 g (12 oz.)
Coil Data
Volts, Nominal DC
Pickup, Max.
Dropout
Coil Resistance (±10%)
12 V
8 Vdc
.5-5 Vdc
N/A
Ratings listed are for 25°C, sea level conditions
26.5 V
16 Vdc
1-10 Vdc
130 Ω
115 V
80 Vdc
5-50 Vdc
2100 Ω
Ordering Information
Sample Part Number ᮣ
Model:
H-26
Coil Voltage:
Blank = 26.5 Vdc
/12Vdc = 12 Vdc
/115Vdc = 115 Vdc
For factory-direct application assistance,
dial 800-253-4560, ext. 2055, or
805-220-2055.
7–76
Catalog 5-1773450-5
Revised 3-13
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
H-26 /12Vdc
USA: [phone]
Asia Pacific: [phone]
UK: [phone]
For additional support numbers
please visit www.te.com