EMC Datasheet, PDF (1/3 Pages) Welwyn Components Limited – Pulse Withstanding Fusible Flameproof Metal Film Resistors

Corcom Product Guide
Catalog: 1654001
Issue Date: 06.2011
Compact and Cost-effective Dual Stage RFI Power Line Filters
EMC Series
UL Recognized
CSA Certified
VDE Approved
EMC Series
• Compact dual stage filter series
• Cost-effective design
• Current rating up to 30A
• High differential mode attenuation in the
lower frequency range
• High common mode performance
• Suitable for switching mode power supplies
Ordering Information
10 EMC 1
Case Styles
1 – .250 [6.3] spade terminals
3 – Wire leads
6 – Threaded bolt
EMC Series
Current Rating
3, 6, 10, 15, 20 or 30A
EMC6
EMC1
Specifications
Maximum leakage current each Line to Ground:
3, 6, 10A
15, 20, 30A
@ 120 VAC 60 Hz:
.21 mA
.73 mA
@250 VAC 50 Hz:
.43 mA
1.52 mA
Hipot rating (one minute):
Line to Ground:
Line to Line:
2250 VDC
1450 VDC
Rated Voltage (max):
250 VAC
Operating Frequency:
50/60 Hz
Rated Current:
3 to 30A
Operating Ambient Temperature Range
(at rated current Ir):
-10°C to +40°C
In an ambient temperature (Ta) higher than +40°C
the
maximum
operating
current (Io)
follows: Io
is calculated as
= Ir (85-Ta)/45
Electrical Schematic
LINE
LOAD
Available Part Numbers
3EMC1
6EMC1
10EMC1
15EMC1
20EMC1
3EMC3
6EMC3
10EMC3
15EMC3
10EMC6
15EMC6
20EMC6
30EMC6
24
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
For email, phone or live chat, please go to
te.com/help
corcom.com