DOG2-J1939 Datasheet, PDF (1/4 Pages) TE Connectivity Ltd – Dual axis inclinometer

DOG2 MEMS SERIES
CAN J1939 INCLINOMETER
SPECIFICATIONS
 Dual axis inclinometer
 Measurement ranges ±90°
 CAN J1939 interface
FEATURES
 8 – 30 VDC supply voltage
 Digital signal processing includes
o filter (e.g. vibration
damping)
o temperature
compensation
 12 bit resolution
 100 Hz refresh rate
 -40 °C – 85 °C temperature range
 Accuracy typically
o 0.5° | -40 °C – 85 °C
o 0.15° | 25 °C
APPLICATIONS
 Mobile and stationary cranes
 Lift platforms
 Building control
 Weighing systems
 Truck chassis leveling
 Vehicle applications
 Road construction machines
The DOG2 MEMS-Series inclinometer dual axis is
mainly developed with focus on platform leveling,
dynamic engine management, tip-over protection and
tilt alarm.
A fast response time and good accuracy makes this
device the ideal choice for mobile leveling
applications. It features digital signal processing
including temperature compensation.
The integrated filter improves performance and allows
using the sensor in many noisy environments (e.g.
vibrations).
The inclinometer includes a powerful digital signal
processing that offers various filteralgorithms and
allows customer specific OEM solutions. It is possible
to adjust the sensor to different environments yielding
an optimized performance. Customization can also be
made in terms of angular range and connectivity,
i.e. cable and connector.
The PA6.6 housing is very compact in size and has
compression limiter bushings for safe installation of
the sensor. It is compatible with oil, grease and fuel
also. Therefore it is frequently used for engine and
vehicle applications.
SENSOR SOLUTIONS /// DOG2 MEMS SERIES CAN J1939 INCLINOMETER
12/2016
Page 1