C-2227103 Datasheet, PDF (1/8 Pages) TE Connectivity Ltd – THIS DRAWING IS A CONTROLLED DOCUMENT.

4
3
THIS DRAWING IS UNPUBLISHED.
C ^{COPYRIGHT 20}
BY -
RELEASED FOR PUBLICATION
20
ALL RIGHTS RESERVED.
1 _{MATERIALS/FINISH:}
CAGE ASSEMBLY - NICKEL-SILVER ALLOY, (0.25) THICK
EMI SPRINGS - COPPER ALLOY/2µm MIN TIN
FRONT FLANGE - ZINC ALLOY/3µm MIN TIN OVER 1.27µm MIN NICKEL OVER 5.08µm
HEAT SINK - ALUMINUM/NICKEL
D
HEAT SINK CLIP - STAINLESS STEEL
LIGHT PIPE: CLEAR POLYCARBONATE
2 _{SPACING BETWEEN CAGES ON THE SAME PCB TO BE SPECIFIED BY THE CUSTOMER,}
MUST COMPLY WITH MINIMUM DIMENSION SHOWN
3 _{REFERENCE APPLICATION SPECIFICATION 114-32023 FOR RECOMMENDED}
DRILL HOLE DIAMETER AND PLATING THICKNESS
4 _{DATUMS AND BASIC DIMENSIONS ESTABLISHED BY CUSTOMER}
5 _{HEAT SINKS AND CLIPS ARE SHIPPED ASSEMBLED, CAGE ASSEMBLY MAY BE}
PRESSED INTO THE PCB AS SHIPPED
6 _{DIMENSION APPLIES WITH MODULE INSERTED IN CAGE}
7 _{UNPLATED THRU HOLE}
C
8. MATES WITH QSFP MSA COMPATIBLE TRANSCEIVER
9 _{SURFACE TRACES PERMITTED WITHIN THIS AREA EXCEPT WHERE CAGE STANDOFFS CONTACT}
10 _{BASELINE FOR THESE DIMENSIONS IS THE CENTER OF COMPLIANT PIN HOLE}
11. DATE CODE (YYWWD) IS MARKED ON TOP OF CAGE BUT IS CONCEALED BY HEAT SINKS,
APPLIES TO CAGE ASSEMBLY ONLY
12 _{REFERENCE APPLICATION SPECIFICATION 114-32023 FOR GASKET THICKNESS CALCULATION}
13 _{HEAT SINKS, LIGHT PIPES AND CLIPS ARE SHIPPED ASSEMBLED, CAGE ASSEMBLY MAY BE}
14 _{HEAT SINKS AND CLIPS SHIPPED ASSEMBLED TO CAGE ASSEMBLY. CAGE ASSEMBLY MAY BE}
LIGHT PIPES, SHIPPED UNATTACHED, MUST BE ASSEMBLED BY CUSTOMER AFTER THE
( 41 )
B
MIN COPPER
2
1
LOC
DIST
GP 00
P
LTR
A
B
REVISIONS
DESCRIPTION
RELEASED PER ECO-14-003627
REVISED PER ECO-15-012666
DATE
31MAR2014
07DEC2015
DWN
APVD
BM EB
JY SH
D
HEAT SINKS
HEAT SINK CLIPS
PCB
FRONT FLANGE
PRESSED INTO THE PCB AS SHIPPED.
PRESSED INTO THE PCB AS SHIPPED.
CAGE IS SEATED IN THE PCB.
( 56.14 )
EMI SPRINGS
C
1X2 CAGE
ASSEMBLY
B
6
( A MAX)
A
1471-9 (3/11)
( 9.5 )
( 19 )
2.2 MAX TYP
9 ^{3 MAX TYP}
5 ²³
NETWORKING
NO LIGHT PIPES
2227103-3
5 16
SAN
NO LIGHT PIPES
2227103-2
5 ^13.7
PCI
NO LIGHT PIPES
2227103-1
A
HEAT SINK
PROFILE
DESCRIPTION
PART
NUMBER
THIS DRAWING IS A CONTROLLED DOCUMENT.
DIMENSIONING AND TOLERANCING
PER ASME Y14.5M-2009
DIMENSIONS:
mm
MATERIAL
TOLERANCES UNLESS
OTHERWISE SPECIFIED:
0 PLC
1 PLC
2 PLC
3 PLC
4 PLC
ANGLES
FINISH
0.2
0.15
0.1
0.05
0.025
1
DWN
10AUG2012
M.E. COWHER
CHK
16AUG2012
R.R. HENRY
TE Connectivity
A
APVD
16AUG2012 ^NAME
R.R. HENRY
RECEPTACLE ASSEMBLY WITH HEAT
PRODUCT SPEC
SINKS, BEHIND BEZEL, 1X2, QSFP28
108-19428
-
APPLICATION SPEC
114-32023
SIZE
CAGE CODE
DRAWING NO
RESTRICTED TO
WEIGHT
-
A2 ⁰⁰⁷⁷⁹
2227103
-
SEE NOTES
SEE NOTES _{Customer Drawing}
SCALE
SHEET
OF
4:1
18
REV
B