C-2198233 Datasheet, PDF (1/4 Pages) TE Connectivity Ltd – THIS DRAWING IS A CONTROLLED DOCUMENT.

8
THIS DRAWING IS UNPUBLISHED.
C ^{COPYRIGHT 20}
BY -
7
RELEASED FOR PUBLICATION
20
ALL RIGHTS RESERVED.
13
A MAX
4X
( 15.9 )
D
4X
( 15 ) _{( 9.7 )}
( 1.7 )
( 2.05 ) TYP
6
( 54.8 )
C
8X ( 3.5 )
8X ( 2.5 )
B
( 21.375 )
3X ( 14.25 )
4X ( 3.25 )
4X ( 3.25 )
A
4805 (3/11)
5
4
3
8X ( 2.7 )
4X 14 0.1
PORT OPENING
2
LOC
DIST
GP 00
P
LTR
1
ORIGINAL
REVISIONS
DESCRIPTION
1
DATE
15NOV2011
DWN
APVD
BMM MRS
D
4X 8.95 0.15
PORT OPENING
( 59.04 )
( 57.25 )
1 _MATERIAL:
CAGE ASSEMBLY: 0.25mm THICK NICKEL SILVER ALLOY
HEATSINK/LIGHTPIPE CLIP: STAINLESS STEEL
LIGHTPIPE: POLYCARBONATE, CLEAR
HEATSINK: ALUMINUM
2 _FINISH:
SPRINGS: MINIMUM OF 0.8um TIN PLATE OVER A MINIMUM OF 0.8um NICKEL
NON-PLATED EDGES PERMISSIBLE.
HEATSINK/LIGHTPIPE CLIP: PASSIVATE.
HEATSINK: ELECTROLESS NICKEL.
UNDERPLATE.
3 _{PADS AND VIAS CHASSIS GROUND.}
4 _{DATUM AND BASIC DIMENSION ESTABLISHED BY CUSTOMER.}
5. MATES WITH SFP MSA COMPLIANT TRANSCEIVERS.
C
6. INTERPRETATION OF DATUM REFERENCE FRAME IN ACCORDANCE WITH SECT 4.4.1.1 OF
7 _{REFERENCE APPLICATION SPEC. 114-13120, HOLE A, FOR RECOMMENDED DRILL HOLE}
PLATING THICKNESS.
8 _{REFERENCE APPLICATION SPEC. 114-13120, HOLE B, FOR RECOMMENDED DRILL HOLE}
PLATING THICKNESS.
9 _{HOLE PATTERN REPEATS FOR EACH PORT. SPACING BETWEEN PORTS IS 14.25mm.}
10 _{MINIMUM PC BOARD THICKNESS:}
SINGLE SIDED = 1.50mm
DOUBLE SIDED = 2.25mm
ASME Y14.5M-1994.
DIAMETER AND
DIAMETER AND
11. CERTAIN MATING TRANSCEIVERS MAY REQUIRE ADDITIONAL PCB THICKNESS THAT WOULD
BE
DETERMINED BY THE CUSTOMER.
12. PRODUCT COMPLIES WITH SPECIFICATION SFF-8433 IMPROVED PLUGGABLE FROM FACTOR
GANGED CAGES.
13 _{DIMENSION APPLIES PRIOR TO INSERTION OF SFP MODULE}
FOR SFP+
14 _{HEATSINK, HEATSINK CLIP, AND LIGHTPIPE SHIPPED UNASSEMBLED}
TO CAGE ASSEMBLY. CAGE ASSEMBLY TO BE PRESSED INTO PCB PRIOR
TO ATTACHING HEATSINK, HEATSINK CLIP, AND LIGHTPIPE TO THE
B
CAGE ASSEMBLY.
15 _{PACKAGED AS A COMPLETE ASSEMBLY.}
15
22.5
NETWORKING, TALL
2198233-4
2198233
FINISHED ASSEMBLY
SCALE 3:1
15
18.1
14
15.5
14
13.2
NETWORKING, SHORT
SAN
PCI
2198233-3
2198233-2
2198233-1
A MAX
APPLICATION
PART
NUMBER
A
THIS DRAWING IS A CONTROLLED DOCUMENT.
DIMENSIONS:
mm
MATERIAL
1
TOLERANCES UNLESS
OTHERWISE SPECIFIED:
0 PLC
1 PLC
2 PLC
3 PLC
4 PLC
ANGLES
FINISH
0.1
0.1
0.1
0.1
0.1
1 $ 0'
2
DWN
B. MATTHEWS
CHK
M. SCHMITT
APVD
M. SCHMITT
PRODUCT SPEC
15NOV2011
15NOV2011
15NOV2011
108-2364
APPLICATION SPEC
114-13120
WEIGHT
-
Customer Drawing
TE Connectivity
NAME
SFP+ ENHANCED 1X4 CAGE ASSEMBLY,
PRESS FIT, EXTERNAL EMI SPRINGS
WITH HEATSINK AND LIGHTPIPE
SIZE
CAGE CODE
DRAWING NO
RESTRICTED TO
A1 ⁰⁰⁷⁷⁹
2198233
SCALE
SHEET
4:1
OF
14
-
REV
A1