C-2198232 Datasheet, PDF (1/4 Pages) TE Connectivity Ltd – THIS DRAWING IS A CONTROLLED DOCUMENT.

8
THIS DRAWING IS UNPUBLISHED.
C ^{COPYRIGHT 20}
BY -
7
RELEASED FOR PUBLICATION
20
ALL RIGHTS RESERVED.
D
2198232
FINISHED ASSEMBLY
SCALE 4:1
C
13
A MAX
2X
( 15.9 )
2X
( 15 )
( 9.7 )
( 1.7 )
( 2.05 ) TYP
B
4X ( 2.5 )
4X ( 3.5 )
( 14.25 )
( 7.125 )
( 3.25 )
A
( 3.25 )
4805 (3/11)
6
( 54.8 )
5
4
1 _MATERIAL:
CAGE ASSEMBLY: 0.25mm THICK NICKEL SILVER ALLOY
EMI SPRINGS: COPPER ALLOY
HEAT SINK: ALUMINUM
HEAT SINK/LIGHTPIPE CLIP: STAINLESS STEEL.
LIGHTPIPE: POLYCARBONATE, CLEAR
2 _FINISH:
SPRINGS: MINIMUM OF 0.8um TIN PLATE OVER MINIMUM OF 0.8um
NICKEL UNDERPLATE. NON-PLATED EDGES PERMISSIBLE.
HEAT SINK: ELECTROLESS NICKEL
HEAT SINK CLIP: PASSIVATE.
3 _{DATUM AND BASIC DIMENSIONS ESTABLISHED BY CUSTOMER.}
5 _{PADS AND VIAS CHASSIS GROUND.}
5. MATES WITH SFP MSA COMPLIANT RECIEVERS.
6. INTERPRETATION OF DATUM REFERENCE FRAME IN ACCORDANCE
WITH SECT 4.4.1.1 OR ASME Y14.5M-1994.
7 _{MINIMUM PC BOARD THICKNESS:}
SINGLE SIDED: 1.5mm
DOUBLE SIDED: 2.25mm
8 _{HOLE PATTERN REPEATS FOR EACH PORT, SPACING BETWEEN}
PORTS IS 14.25mm.
9 _{REFERENCE APPLICATION SPEC. 114-13120, HOLE A, FOR RECOMMENDED}
DRILL HOLE DIAMETER AND PLATING THICKNESS.
4X ( 1.7 )
3
2
1
LOC
DIST
GP 00
P
LTR
A
A1
REVISIONS
DESCRIPTION
RELEASED PER ECO-12-013192
RELEASED PER ECO-14-008488
DATE
DWN
APVD
08OCT2012
06JUNE2014
BMM MRS
PP SH
10 _{REFERENCE APPLICATION SPEC. 114-13120, HOLE B, FOR RECOMMENDED}
DRILL HOLE DIAMETER AND PLATING THICKNESS.
11. CERTAIN MATING TRANCEIVERS MAY REQUIRE ADDITIONAL PCB THICKNESS
THAT WOULD NEED TO BE DETERMINED BY THE CUSTOMER.
D
12. PRODUCT COMPLIES WITH SPECIFICATION
SFF-8433 IMPROVED PLUGGABLE FORM
FACTOR FOR SFP+ GANGED CAGES.
13 _{DIMENSION APPLIES PRIOR TO INSERTION}
OF SFP MODULE.
14 _{HEATSINK, HEATSINK CLIP, AND LIGHTPIPE SHIPPED UNASSEMBLED}
TO CAGE ASSEMBLY. CAGE ASSEMBLY TO BE PRESSED INTO PCB PRIOR
TO ATTACHING HEATSINK, HEATSINK CLIP, AND LIGHTPIPE TO THE
CAGE ASSEMBLY.
15 _{PACKAGED AS A COMPLETE ASSEMBLY.}
2X 14 0.1
PORT OPENING
C
( 48.7 )
( 28.75 )
MEASURED ACROSS CAGE SIDES
2X 8.95 0.15
PORT OPENING
B
( 30.54 )
15
22.5
NETWORKING, TALL
2198232-4
15
18.1
NETWORKING, SHORT
2198232-3
14
15.5
SAN
2198232-2
14
13.2
PCI
2198232-1
A MAX
DESCRIPTION
PART
NUMBER
A
THIS DRAWING IS A CONTROLLED DOCUMENT.
DIMENSIONS:
mm
MATERIAL
1
TOLERANCES UNLESS
OTHERWISE SPECIFIED:
0 PLC
1 PLC
2 PLC
3 PLC
4 PLC
ANGLES
FINISH
0.13
0.1
0.08
.05
.05
1
2
DWN
B. MATTHEWS
CHK
M. SCHMITT
APVD
M. SCHMITT
PRODUCT SPEC
01NOV2011
01NOV2011
01NOV2011
108-2364
APPLICATION SPEC
114-13120
WEIGHT
-
Customer Drawing
TE Connectivity
NAME
SFP+ ENHANCED 1X2 CAGE ASSEMBLY,
PRESS-FIT, EXTERNAL EMI SPRINGS
WITH HEATSINK AND LIGHTPIPE
SIZE
CAGE CODE
DRAWING NO
RESTRICTED TO
A1 ⁰⁰⁷⁷⁹
2198232
SCALE
SHEET
5:1
OF
14
-
REV
A1