C-2143330 Datasheet, PDF (1/5 Pages) TE Connectivity Ltd – THIS DRAWING IS A CONTROLLED DOCUMENT.

8
THIS DRAWING IS UNPUBLISHED.
C ^{COPYRIGHT 2008}
BY -
RELEASED FOR PUBLICATION
ALL RIGHTS RESERVED.
7
2008
D
3 MAX TYP
DETAIL S ₁₂
SCALE 20:1
C
6
5
4
1 _{CAGE ASSEMBLY MATERIAL: NICKEL SILVER, 0.25 THICK}
HEAT SINK MATERIAL: ALUMINUM
HEAT SINK CLIP MATERIAL: STAINLESS STEEL
EMI SPRING MATERIAL: COPPER ALLOY
FRONT FLANGE MATERIAL: ZINC ALLOY
2 _{PITCH BETWEEN PORTS OF ONE 1X6 CAGE ASSEMBLY.}
3 _{SPACING BETWEEN CAGES ON THE SAME PC BOARD, TO BE SPECIFIED BY}
CUSTOMER, MUST COMPLY WITH MINIMUM DIMENSIONS SHOWN.
4 _{REFERENCE APPLICATION SPEC 114-13218 FOR RECOMMENDED DRILL HOLE}
DIAMETER AND PLATING THICKNESS.
5 _{DATUMS AND BASIC DIMENSIONS ESTABLISHED BY CUSTOMER.}
6 _{DIMENSION F IS THE NOMINAL THICKNESS OF CUSTOMER SUPPLIED PC BOARD,}
SINGLE SIDED PC BOARD MINIMUM THICKNESS = 1.45mm
DOUBLE SIDED PC BOARD MINIMUM THICKNESS = 2.2mm PER QSFP.
7. HEAT SINKS AND HEAT SINK CLIPS SHIPPED ASSEMBLED TO CAGE ASSEMBLY.
CAGE ASSEMBLY MAY BE PRESSED INTO THE PCB AS SHIPPED.
8 _{DATUM A IS TOP SURFACE OF PC BOARD.}
9 _{DIMENSION APPLIES WITH MODULE INSERTED IN CAGE.}
10 _{UNPLATED THRU HOLE.}
11. MATES WITH QSFP MSA COMPATIBLE TRANSCEIVER.
12 _{SURFACE TRACES PERMITTED WITHIN THIS AREA EXCEPT WHERE CAGE STANDOFFS,}
SHOWN IN DETAIL S, CONTACT PC BOARD.
13 _{BASELINE FOR THESE DIMENSIONS IS THE CENTER OF COMPLIANT PIN HOLE.}
14 _{2D BARCODE AND DATE CODE (YYWWD) MARKED ON SIDE OF CAGE.}
14
2D BARCODE AND DATE CODE
9B
MAX
2.2 MAX
B
SEE DETAIL
S
3
2
1
LOC
DIST
GP 00
P
LTR
4
5
6
A
REVISIONS
DESCRIPTION
UPDATED VIEWS
REVISED PER ECO-12-003841
REVISED PER ECO-12-005533
REVISED PER ECO-15-000148
DATE
30MAR2011
14MAR2012
05APR2012
10APR2015
DWN
APVD
AL CW
TY KS
JY AC
RG MC
15 _{REFERENCE APP SPEC 114-13218 FOR GASKET THICKNESS CALCULATION.}
16 _{EMI SPRING FINISH: 2um MINIMUM TIN}
FRONT FLANGE FINISH: 3um MINIMUM TIN OVER 1.27um MINIMUM NICKEL
OVER 5.08um MINIMUM COPPER.
HEAT SINK FINISH: NICKEL
D
C
( 117 )
5X ( 19 ) ₂
B
CAGE ASSEMBLY
A
4805 (3/11)
EMI SPRINGS
FRONT FLANGE
23.0
NETWORKING
2143330-3
16.0
SAN
2143330-2
13.7
PCI
2143330-1
B
HEAT SINK
PROFILE
PART
NUMBER
A
THIS DRAWING IS A CONTROLLED DOCUMENT.
DIMENSIONS:
mm
MATERIAL
-
-₁
TOLERANCES UNLESS
OTHERWISE SPECIFIED:
0 PLC
1 PLC
2 PLC
3 PLC
4 PLC
ANGLES
FINISH
-
0.1
0.1
-
-
-
-
1- 6
DWN
17MAR2010
C. VALENTINE
CHK
17MAR2010
J. PETERSON
APVD
17MAR2010
J. PETERSON
PRODUCT SPEC
108-2286
APPLICATION SPEC
114-13218
WEIGHT
-
Customer Drawing
TE Connectivity
NAME
1X6 CAGE ASSEMBLY, BEHIND BEZEL,
W/ HEAT SINKS,
QSFP
SIZE
CAGE CODE
DRAWING NO
RESTRICTED TO
A1 ⁰⁰⁷⁷⁹
2143330
SCALE
SHEET
3:1
OF
15
-
REV
A