C-1926088 Datasheet, PDF (1/2 Pages) TE Connectivity Ltd – IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION

8
7
6
THIS DRAWING IS UNPUBLISHED.
RELEASED FOR PUBLICATION
20
C ^{COPYRIGHT 20}
BY TYCO ELECTRONICS CORPORATION.
ALL RIGHTS RESERVED.
1 _{RECOMMENDED PRINTED CIRCUIT BOARD HOLE DIMENSIONS FOR COMPLIANT TAILS:}
FINISHED HOLE TIN PLATING: n 0.56 # 0.05
FINISHED HOLE BARE COPPER: n 0.575 # 0.05
DRILLED HOLE: n 0.65 # 0.02
COPPER PLATING THICKNESS (MAX HARDNESS 150 KNOOP): 0.025-0.050
TIN PLATING THICKNESS (MIN): 0.0038-0.0124
ORGANIC SOLDERABILITY PRESERVATIVE (OSP): USE WITH BARE COPPER.
2 ^{PC BOARD THICKNESS 1.6mm MINIMUM.}
D
3 DAUGHTERCARD PC BOARD THICKNESS IS 1.6mm # 10%. DIMENSION FROM PCB EDGE TO
PLATED PAD SAND OPTIONAL PCB EDGE CHAMFERS ARE BASED ON 2 OZ. MAX. THICK
COPPER LAYERS TYPICAL FOR POWER APPLICATIONS AND 1mm PCB PROFILE CHAMFER
TO PREVENT COPPER EDGE FROM ENGAGING BEFORE PCB SUBSTRATE MATERIAL.
4 26.90mm TO q OF ADJACENT CROWN EDGE CONNECTOR.
5. MATERIAL: HOUSING AND OVERMOLDS: LCP, BLACK, UL94V-0 RATED
CONTACTS: COPPER ALLOY.
6 _{FINISH: MATING AREA- 0.76µM MIN. GOLD OVER 3.81 MICROMETER MIN. NICKEL}
0.64µM MIN. GOLD ON ADJACENT FLAT SIDES IN MATING AREA.
COMPLIANT PIN AREA- 1.27µM MIN. MATTE TIN PLATE OVER 1.27µM MIN.
NICKEL PLATE. MATING AREA AND ADJACAENT FLAT SIDES LUBRICATED
WITH BELLCORE APPROVED LUBRICANT. TECHNICAL REFERENCE
GR-1217-CORE ISSUE 1, NOVEMBER 1995.
7 _{FINISH: MATING AREA- 1.27µM MIN. GOLD OVER 3.81µm MIN. NICKEL PLATE}
0.64µm MIN. GOLD ON ADJACENT FLAT SIDES IN MATING AREA.
COMPLIANT PIN AREA- 1.27µm MIN. MATTE TIN PLATE OVER 1.27µm MIN.
NICKEL PLATE. MATING AREA AND ADJACENT FLAT SIDES LUBRICATED
WITH BELLCORE APPROVED LUBRICANT. TECHNICAL REFERENCE
C
GR-1217-CORE ISSUE 1, NOVEMBER 1995.
8 _{FINISH: MATING AREA- 0.76µm MIN. GOLD OVER 1.27µm MIN. NICKEL PLATE.}
0.076µm MIN. GOLD ON ADJACENT FLAT SIDES IN MATING
COMPLIANT PIN AREA- 1.27µm MIN. MATTE TIN PLATE OVER 1.27µm MIN.
NICKEL PLATE. MATING AREA AND ADJACAENT FLAT SIDES LUBRICATED
WITH BELLCORE APPROVED LUBRICANT. TECHNICAL REFERENCE GR-1217-CORE
ISSUE 1, NOVEMBER 1995.
9. 450 LBS MAXIMUM FORCE ALLOWED ON TOP OF HOUSING DURING APPLICATION TO PCB
PREVENT HOUSING DAMAGE.
10 _{FINISH: MATING AREA- 2.54µM MIN. GOLD OVER 3.81µm MIN. NICKEL PLATE}
0.64µm MIN. GOLD ON ADJACENT FLAT SIDES IN MATING AREA.
COMPLIANT PIN AREA- 1.27µm MIN. MATTE TIN PLATE OVER 1.27µm MIN.
NICKEL PLATE. MATING AREA AND ADJACENT FLAT SIDES LUBRICATED
WITH BELLCORE APPROVED LUBRICANT. TECHNICAL REFERENCE
GR-1217-CORE ISSUE 1, NOVEMBER 1995.
11 _{PREPRODUCTION, FASR REQUIRED}
12 _{PART NUMBER WITH PIN OMITTED, SEE TABLE FOR LOCATION}
B
5
PLATE.
AREA.
5.2
TO
4.1
4
PIN 2
PIN 1
0.77
0.8
SECTION V-V
A
AMP 4805 REV 31MAR2000
1926088-5
WITH PIN 3,4,7,8,11,12 OMITTED
3
2
1
LOC
DIST
GP 00
P
LTR
A
B
B1
B2
REVISIONS
DESCRIPTION
RELEASED PER ECO-08-025381
REV PER ECO-10-004250
REV PER ECO-15-015062
ECO-16-005324
DATE
15OCT2008
03MAR2010
04FEB2016
06APR2016
DWN
APVD
RG PD
RG MS
SZ SZ
SZ SZ
PIN 30
D
SLOT
PIN 29
SCALE 4:1
6.8
4.8
C
15
14
0.27
REF
26.8
TAIL
1.49
TYP
B
9
12 _{3,4,7,8,11,12}
11
OBSOLETE
42R4709
7
1926088-5
10
1926088-4
6
1926088-3
7
1926088-2
8
1926088-1
OMITTED PIN
IBM PART NO
FINISH
PART NO
A
THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION
IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION
SHOULD BE CONTACTED FOR THE LATEST REVISION.
DIMENSIONS:
mm
MATERIAL
-
-
TOLERANCES UNLESS
OTHERWISE SPECIFIED:
0 PLC
1 PLC
2 PLC
3 PLC
4 PLC
ANGLES
FINISH
0.25
0.25
0.13
0.08
-
1 $ 0'
-
-
DWN
06MAR2006
WM VAN SCYOC
CHK
06MAR2006
N. REESER
APVD
06MAR2006
N. REESER
PRODUCT SPEC
-
APPLICATION SPEC
-
WEIGHT
-
CUSTOMER DRAWING
Tyco Electronics
Harrisburg, PA 17105-3608
NAME
ASSEMBLY, CROWN EDGE, VERTICAL CARD
EDGE, 30 SIGNAL POSITION
-
SIZE
CAGE CODE
DRAWING NO
RESTRICTED TO
A1 ⁰⁰⁷⁷⁹
1926088
SCALE
SHEET
3:1
OF
12
-
REV
B2