82A0132 Datasheet, PDF (1/1 Pages) TE Connectivity Ltd – This specification sheet forms a part of the latest issue of Raychem Specification 80.

SPECIFICATION CONTROL DRAWING
TITLE
THREE CONDUCTOR CABLE, UNSHIELDED, UNJACKETED,
GENERAL PURPOSE, FLEXIBLE, 600 VOLT
Date
1-7-13
This specification sheet forms a part of the latest issue of Raychem Specification 80.
COMPONENT WIRES - 82A0112
82A0132
Revision
B
PART NUMBER
1/
82A0132-26-*
82A0132-24-*
82A0132-22-*
82A0132-20-*
82A0132-18-*
82A0132-16-*
CABLE CONSTRUCTION DETAILS
CONDUCTOR
SIZE
(AWG)
OUTSIDE DIAMETER
(inches)
NOMINAL
MAXIMUM
26
.071
.078
24
.080
.086
22
.093
.099
20
.114
.123
18
.138
.147
16
.171
.179
MAXIMUM
WEIGHT
(lb/1000 ft.)
4.3
6.4
8.9
12.9
20.5
31.2
CABLE RATINGS AND ADDITIONAL REQUIREMENTS
TEMPERATURE RATING: 150°C
Maximum continuous conductor temperature
VOLTAGE RATING: 600 volts (rms) at sea level
DIELECTRIC WITHSTAND: 1500 volts (rms), 60 Hz
PART NUMBER:
The "*" in the part numbers above shall be replaced by color code designators with a slash
separating the component wire colors. Colors shown do not necessarily reflect the sequence of
manufacturing.
1/ Example: AWG 22, black, brown and red component wires: 82A0132-22-0/1/2
NOTE: Nominal values are for information only.
Nominal values are not requirements.
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. HOWEVER, DUE TO LENGTH LIMITATIONS OF THE RAYCHEM PART NUMBER,
AN ALTERNATIVE COLOR CODE MAY REPLACE MIL-STD-681 COLOR CODE DESIGNATORS. (EXAMPLE: “901/902...” MAY BE REPLACED BY “Axxx”.) OTHER CODES AND
SUFFIXES MAY BE ADDED TO THE PART NUMBER AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
Page 1 of 1
Raychem, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks.
DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL.
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
Raychem Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: [phone]
Fax: [phone]
© 2013 Tyco Electronics Corporation. All rights reserved.