810M1 Datasheet, PDF (1/3 Pages) TE Connectivity Ltd – Piezoelectric Linear Accelerometer

DIMENSIONS
MODEL 810M1 ACCELEROMETER
SPECIFICATIONS
 Piezoelectric Linear Accelerometer
 ±25g & ±100g Dynamic Ranges
 Wide Bandwidth to 6000Hz
 Circuit Board Mountable
The Model 810M1 is a low cost, board mountable
accelerometer designed for general purpose vibration
measurements. The accelerometer is available in ±25g or
±100g range and provides a flat frequency response up to
>6kHz. Featuring stable piezo-ceramic crystals in shear
mode, the accelerometer incorporates an amplified ±1.25V
output and is offered in two measurement direction options
(X or Z axis).
FEATURES
 Two Measurement Directions
 3.3 to 5.5Vdc Excitation Voltage
 Hermetically Sealed
 Piezo-Ceramic Shear Design
 -40° to +125°C Operating Range
APPLICATIONS
 Asset Monitoring
 Data Loggers
 Impact Monitoring
 Machine Health Monitoring
 System Wake-Up Switch
Direction of measurement must be specified at time of
order. See Ordering Info on page
SENSOR SOLUTIONS /// Model 810M1 Rev A
9/2015
Page 1