6EL1S Datasheet, PDF (1/5 Pages) Tyco Electronics – Power Entry Module with RFI Power Line Filter for General or Medical Applications

L Series
Corcom Product Guide
Dual Configuration Power Entry Module
Catalog: 1654001
Issue Date: 06.2011
UL Recognized
CSA Certified
VDE Approved
EDL4C / EHL4C
L Series
• Power entry module with switch or fuse
• For 10A capability and high performance filtering
see the P Series on page 192
• Two element circuit provides extended EMI
attenuation similar to EAB inlet filter
• North American or metric fuse holders
• Available with minimal leakage current for medical
applications (HL models)
Ordering Information
6EDL1SCM
Fuseholder Type (pre-installed)
M – Metric
Omit for North American
Mounting Type
C– Snap-In
Omit for flange mount
Switch Option
S – DPST on/off switch
Omit for none
EDL1S / EHL1S
Specifications
Maximum leakage current each Line to Ground:
DL Models
HL Models
@ 120 VAC 60 Hz:
.25 mA
2 A
@ 250 VAC 50 Hz:
.50 mA
5 A
Hipot rating (one minute):
Line to Ground:
Line to Line:
2250 VDC
1450 VDC
Operating Voltage:
1S & 1SC models (fixed):
250 VAC max.
4 & 4C Suffix:
100, 120, 220 or 240 VAC.
Operating Frequency:
50/60 Hz
Rated Current:
2 to 6A
Required Fuse(s):
North American:
Metric:
one .25 x 1.25”(not included)
two 5 x 20mm (not included)
Switch:
DPST
10,000 operations at 51A max. inrush
Voltage Selection Positions
1 or 4
L Series
Filter Type
D – General Purpose
H – Medical
omit for none
Leakage current designation
E – Low Leakage (<0.5 mA)
Current Rating
2, 4 or 6A
3
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
175
For email, phone or live chat, please go to
te.com/help
corcom.com