55PC1811 Datasheet, PDF (1/2 Pages) TE Connectivity Ltd – This specification sheet forms a part of the latest issue of Raychem Specification 55PC.

SPECIFICATION CONTROL DRAWING
SCD
55PC1811
Title
ONE CONDUCTOR CABLE, SHIELDED, JACKETED, GENERAL PURPOSE, 600 VOLT
Date
7-9-15
Revision
C
This specification sheet forms a part of the latest issue of Raychem Specification 55PC.
COMPONENT WIRE - 55PC0811
SHIELD - TIN-COATED COPPER
JACKET - RADIATION-CROSSLINKED,
MODIFIED ETFE
PART NUMBER
1/
55PC1811-24-*
55PC1811-22-*
55PC1811-20-*
55PC1811-18-*
55PC1811-16-*
55PC1811-14-*
55PC1811-12-*
55PC1811-10-*
55PC1811-8-*
55PC1811-6-*
55PC1811-4-*
55PC1811-2-*
55PC1811-0-*
CONDUCTOR
SIZE
(AWG)
24
22
20
18
16
14
12
10
8
6
4
2
0
SHIELD
SIZE
(AWG)
38
38
38
38
38
38
38
38
38
38
36
36
34
CABLE CONSTRUCTION DETAILS
JACKET THICKNESS
(inch)
OUTSIDE DIAMETER
(inch)
LOWER
SPEC LIMIT
TARGET
WALL
LOWER
SPEC LIMIT
TARGET
VALUE
UPPER
SPEC LIMIT
.0050
.0060
.069
.073
.077
.0050
.0060
.075
.079
.083
.0050
.0060
.084
.087
.091
.0050
.0060
.094
.097
.101
.0050
.0060
.102
.105
.109
.0050
.0065
.118
.122
.127
.0050
.0065
.137
.141
.145
.0050
.0065
.155
.163
.171
.0070
.0090
.219
.231
.243
.0070
.0090
.263
.277
.291
.0080
.0100
.334
.352
.370
.0085
.0110
.405
.426
.447
.0085
.0110
.488
.514
.540
WEIGHT
(lbs/1000 ft.)
TARGET
VALUE
UPPER
SPEC LIMIT
5.74
6.04
7.07
7.40
9.14
9.49
12.06
12.51
14.44
14.92
20.29
20.90
28.43
29.16
41.33
42.81
73.26
75.89
110.56
114.19
178.54
184.20
269.90
278.04
408.52
420.27
Page 1 of 2
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. HOWEVER, DUE TO LENGTH LIMITATIONS OF THE RAYCHEM PART NUMBER,
AN ALTERNATIVE COLOR CODE MAY REPLACE MIL-STD-681 COLOR CODE DESIGNATORS. (EXAMPLE: "901/902..." MAY BE REPLACED BY "Axxx".) OTHER CODES
AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
Raychem, TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks.
DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL.
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
Raychem Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: [phone]
Fax: [phone]
© 2015 Tyco Electronics Corporation. All rights reserved.