55PC0812 Datasheet, PDF (1/2 Pages) TE Connectivity Ltd – This specification sheet forms a part of the latest issue of Raychem Specification 55PC.

SPECIFICATION CONTROL DRAWING
TITLE
WIRE, RADIATION-CROSSLINKED, MODIFIED ETFE-INSULATED, NORMAL WEIGHT, GENERAL PURPOSE, 600 VOLT
This specification sheet forms a part of the latest issue of Raychem Specification 55PC.
55PC0812
Date
Revision
1-17-12
D
CONDUCTOR - SILVER-COATED COPPER
INSULATION - RADIATION - CROSSLINKED,
MODIFIED ETFE
PART
NUMBER
1/
55PC0812-26-*
55PC0812-24-*
55PC0812-22-*
55PC0812-20-*
55PC0812-18-*
55PC0812-16-*
55PC0812-14-*
55PC0812-12-*
55PC0812-10-*
55PC0812-8-*
55PC0812-6-*
55PC0812-4-*
55PC0812-2-*
55PC0812-1-*
55PC0812-0-*
55PC0812-00-*
CONSTRUCTION DETAILS
WIRE
SIZE
(AWG)
26
24
22
20
18
16
14
12
10
8
6
4
2
1
0
00
CONDUCTOR
STRANDING
(number x AWG)
19 x 38
19 x 36
19 x 34
19 x 32
19 x 30
19 x 29
19 x 27
37 x 28
37 x 26
133 x 29
133 x 27
133 x 25
665 x 30
817 x 30
1045 x 30
1330 x 30
CONDUCTOR DIAMETER
(in.)
LOWER
SPEC
LIMIT
.0175
.0225
.0285
.0365
.0452
.0514
.0644
.0825
.1050
.158
.198
.250
.320
.360
.395
.440
TARGET
VALUE
.0183
.0233
.0293
.0375
.0464
.0527
.0659
.0845
.1070
.163
.205
.260
.330
.370
.415
.462
UPPER
SPEC
LIMIT
.0191
.0241
.0301
.0385
.0476
.0538
.0674
.0865
.1090
.169
.212
.268
.340
.380
.425
.475
MAXIMUM
RESISTANCE
AT 20°C
(ohms/1000 ft.)
38.4
24.3
15.1
9.19
5.79
4.52
2.88
1.90
1.19
.658
.418
.264
.170
.139
.108
.085
LOWER
SPEC
LIMIT
.0366
.0416
.0476
.0561
.0659
.0737
.0896
.1076
.1290
.188
.233
.300
.370
.408
.449
.505
FINISHED WIRE
DIAMETER
(in.)
TARGET
VALUE
UPPER
SPEC
LIMIT
.0385
.0404
.0435
.0454
.0495
.0514
.0580
.0599
.0680
.0701
.0760
.0783
.0920
.0944
.1105
.1134
.1330
.1370
.196
.203
.242
.251
.311
.322
.383
.397
.423
.438
.466
.483
.525
.545
WEIGHT
(lbs/1000 ft.)
TARGET
VALUE
UPPER
SPEC
LIMIT
1.55
1.70
2.18
2.34
3.12
3.30
4.64
4.85
6.94
7.27
8.80
9.17
13.50
13.99
20.45
21.08
31.73
32.78
56.8
59.9
89.7
94.7
146.
154.
227.
240.
278.
288.
343.
366.
450.
481.
Page 1 of 2
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE
ADDED TO THE PART NUMBER. AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
Raychem, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks.
DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL.
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
Raychem Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: [phone]
Fax: [phone]
© 2009-2012 Tyco Electronics Corporation,. All rights reserved.