55A3212 Datasheet, PDF (1/1 Pages) TE Connectivity Ltd – This specification sheet forms a part of the latest issue of Raychem Specification 55A.

SPECIFICATION CONTROL DRAWING
TITLE
ONE CONDUCTOR CABLE, SHIELDED, GENERAL PURPOSE, 600 VOLT
Date_3-14-13
55A3212
Revision _A
This specification sheet forms a part of the latest issue of Raychem Specification 55A.
COMPONENT WIRE - 55A0212
SHIELD - SILVER-COATED COPPER
PART NUMBER
1/
55A3212-26-*
55A3212-24-*
55A3212-22-*
55A3212-20-*
55A3212-18-*
55A3212-16-*
55A3212-14-*
55A3212-12-*
55A3212-10-*
CABLE CONSTRUCTION DETAILS
CONDUCTOR
SIZE
(AWG)
SHIELD
SIZE
(AWG)
OUTSIDE DIAMETER
(inches)
NOMINAL MAXIMUM
26
38
.051
.056
24
38
.056
.061
22
38
.062
.067
20
38
.070
.077
18
38
.080
.087
16
38
.088
.096
14
38
.105
.114
12
38
.123
.133
10
38
.148
.162
MAXIMUM
WEIGHT
(lbs/1000 ft.)
3.6
4.5
5.8
7.7
10.6
12.9
18.6
26.5
39.6
CABLE RATINGS AND ADDITIONAL REQUIREMENTS
TEMPERATURE RATING: 200°C
Maximum continuous conductor temperature
VOLTAGE RATING: 600 volts (rms) at sea level
DIELECTRIC WITHSTAND: 1500 volts (rms), 60 Hz
SHIELD COVERAGE: 85% (minimum)
PART NUMBER:
The “*” in the part numbers above shall be replaced by a color code designator.
1/ Example: AWG 20, white component wire: 55A3212-20-9
NOTE: Nominal values are for information only.
Nominal values are not requirements.
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. HOWEVER, DUE TO LENGTH LIMITATIONS OF THE RAYCHEM PART NUMBER,
AN ALTERNATIVE COLOR CODE MAY REPLACE MIL-STD-681 COLOR CODE DESIGNATORS. (EXAMPLE: “901/902...” MAY BE REPLACED BY “Axxx”.) OTHER CODES AND
SUFFIXES MAY BE ADDED TO THE PART NUMBER AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
Page 1 of 1
Raychem, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks.
DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL.
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
Raychem Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: [phone]
Fax: [phone]
© 2013 Tyco Electronics Corporation. All rights reserved.