55A0816 Datasheet, PDF (1/2 Pages) TE Connectivity Ltd – This specification sheet forms a part of the latest issue of Raychem Specification 55A.

SPECIFICATION CONTROL DRAWING ^SCD
Title
WIRE, RADIATION-CROSSLINKED, MODIFIED ETFE-INSULATED,
NORMAL WEIGHT, GENERAL PURPOSE, 600 VOLT
Date
1-12-17
This specification sheet forms a part of the latest issue of Raychem Specification 55A.
55A0816
Revision
N
PRIMARY INSULATION - RADIATION-CROSSLINKED,
MODIFIED ETFE
Primary insulation shall be of a contrasting
pigmentation to that of the jacket.
CONDUCTOR - NICKEL-COATED HIGH-STRENGTH
COPPER ALLOY
JACKET - RADIATION-CROSSLINKED,
MODIFIED ETFE
PART
NUMBER
1/
55A0816-26-*
55A0816-24-*
55A0816-22-*
55A0816-20-*
55A0816-18-*
55A0816-16-*
WIRE
SIZE
(AWG)
26
24
22
20
18
16
TABLE I. CONSTRUCTION DETAILS
CONDUCTOR
STRANDING
(number x AWG)
DIAMETER OF
STRANDED
CONDUCTOR
(inch)
MINIMUM MAXIMUM
FINISHED WIRE
MAXIMUM
RESISTANCE
AT 20°C
(ohms/1000 ft.)
DIAMETER
(inch)
19 x 38
.018
.020
49.4
.040 ± .002
19 x 36
.023
.025
30.1
.045 ± .002
19 x 34
.029
.031
18.6
.050 ± .002
19 x 32
.037
.040
11.4
.058 ± .002
19 x 30
.046
.051
7.1
.070 ± .003
19 x 29
.052
.058
5.5
.077 ± .003
MAXIMUM
WEIGHT
(lbs/1000 ft.)
1.70
2.30
3.30
4.80
7.70
9.50
PART
NUMBER
1/
55A0816-26-*
55A0816-24-*
55A0816-22-*
55A0816-20-*
55A0816-18-*
55A0816-16-*
TABLE II. PERFORMANCE DETAILS
MANDREL DIAMETER
(inch) (± 3%)
WEIGHT
(lb) (± 3%)
LIFE CYCLE,
IMMERSION, AND
ACCELERATED AGING
COLD
BEND
LIFE CYCLE,
IMMERSION, AND
ACCELERATED AGING
.375
1.00
.500
.500
1.00
.750
.500
1.00
1.00
.500
1.00
1.50
.750
1.50
2.00
1.00
1.50
2.00
COLD
BEND
3.00
3.00
3.00
4.00
4.00
5.00
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE
ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
Page 1 of 2
Raychem, TE Connectivity, TE Connectivity (logo), and TE (logo) are trademarks.
DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL.
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
Raychem Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: [phone]
Fax: [phone]
© 2008-2017 Tyco Electronics Corporation. All rights reserved.