55A0212 Datasheet, PDF (1/2 Pages) TE Connectivity Ltd – This specification sheet forms a part of the latest issue of Raychem Specification 55A.

SPECIFICATION CONTROL DRAWING
TITLE
WIRE, RADIATION-CROSSLINKED, MODIFIED ETFE-INSULATED,
MEDIUM WEIGHT, GENERAL PURPOSE, 600 VOLT
Date
10-21-11
This specification sheet forms a part of the latest issue of Raychem Specification 55A.
55A0212
Revision
C
CONDUCTOR - SILVER-COATED COPPER
PRIMARY INSULATION - RADIATION-CROSSLINKED,
MODIFIED ETFE
Primary insulation shall be of a
contrasting pigmentation to that
of the jacket.
JACKET - RADIATION-CROSSLINKED,
MODIFIED ETFE
PART NUMBER
1/
55A0212-26-*
55A0212-24-*
55A0212-22-*
55A0212-20-*
55A0212-18-*
55A0212-16-*
55A0212-14-*
55A0212-12-*
55A0212-10-*
WIRE
SIZE
(AWG)
26
24
22
20
18
16
14
12
10
CONDUCTOR
STRANDING
(number x AWG)
19 x 38
19 x 36
19 x 34
19 x 32
19 x 30
19 x 29
19 x 27
37 x 28
37 x 26
TABLE I. CONSTRUCTION DETAILS
DIAMETER OF
STRANDED
CONDUCTOR
(in.)
MINIMUM MAXIMUM
MAXIMUM
RESISTANCE
AT 20°C
(ohms/1000 ft.)
.018
.019
38.4
.023
.025
24.3
.029
.031
15.1
.037
.039
9.19
.046
.048
5.79
.052
.054
4.52
.065
.068
2.88
.084
.087
1.90
.106
.112
1.19
FINISHED WIRE
DIAMETER
(in.)
MAXIMUM
WEIGHT
(lbs/1000 ft.)
.034 ± .002
1.5
.039 ± .002
2.1
.045 ± .002
3.1
.053 ± .003
4.6
.063 ± .003
7.0
.071 ± .003
8.9
.088 ± .004
13.7
.106 ± .004
20.7
.131 ± .006
32.5
PART NUMBER
1/
55A0212-26-*
55A0212-24-*
55A0212-22-*
55A0212-20-*
55A0212-18-*
55A0212-16-*
55A0212-14-*
55A0212-12-*
55A0212-10-*
TABLE II. PERFORMANCE DETAILS
BEND TESTING
MANDREL DIAMETER
(inch) (± 3%)
WEIGHT
(lb) (± 3%)
IMMERSION,
LIFE CYCLE AND
ACCELERATED AGING
COLD
BEND
IMMERSION,
LIFE CYCLE AND
ACCELERATED AGING
.375
1.00
.125
.375
1.00
.250
.500
1.00
.375
.500
1.00
.500
.500
1.50
.500
.750
1.50
.750
1.00
2.00
1.00
1.50
2.00
1.50
2.00
3.00
1.50
COLD
BEND
1.50
2.00
2.00
2.00
2.00
3.00
4.00
4.00
4.00
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE
ADDED TO THE PART NUMBER. AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
Page 1 of 2
Raychem, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks.
DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL.
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
Raychem Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: [phone]
Fax: [phone]
© 2011 Tyco Electronics Corporation,. All rights reserved.