430 Datasheet, PDF (1/3 Pages) Littelfuse – Surface Mount Fuses - Thin-Film Surface Mount

General Purpose Relays
Power Relays
Power Relay 430 3mm
n 1 pole 16A, 1 form A (NO) contact
n Safety mains isolation
n Contact gap >3mm
n DC and AC coil
n 4kV/8mm coil-contact, reinforced insulation (VDE 0700)
n PCB mounting or quick connect terminals
n Mounting brackets or snap mounting
n Version with arc blow magnet for high DC loads
n Product in accordance to IEC 60335-1
SCHRACK
Typical applications
Domestic appliances, industrial appliances, industrial controls
VZ
F0256-B
Approvals
VDE REG.-Nr. C820, UL E214024
Technical data of approved types on request
Contact Data
Contact arrangement
1 form A (NO)
Contact gap
>3mm
Rated voltage
250VAC
Max. switching voltage
400VAC
Rated current
16A
Limiting making current, max 4 s, duty factor 10% 25A
Breaking capacity max.
4000VA
Contact material
AgCu3, AgCdO
Contact style
bifurcated contact
Frequency of operation, with/without load
900/18000h^-1
Contact ratings
Type
Contact Load
IEC 61810
0430 .4 .. 0 A (NO) 16A, 250VAC, cosφ=1, 70°C
0430 .4 .. 1 A (NO) 16A, 250VAC, cosφ=1, 70°C
Cycles
50x103
50x103
Mechanical endurance
DC coil
AC coil
>250x10³ operations
>250x10³ operations
Coil Data
Coil voltage range
DC coil
AC coil
Operative range, IEC 61810
6 to 110VDC
6 to 240VAC
2
Coil versions, DC coil
Coil
Rated
Operate Release
Coil
Rated coil
code
voltage
voltage
voltage resistance power

VDC
VDC
VDC
Ω±10%
mW
09
12
7.8
0.6
145
993
10
24
15.6
1.2
580
993
11
48
31.2
2.4
2200
1047
13
110
71.5
5.5
13000
931
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
Coil versions, AC coil, 50Hz
Coil
Rated
Operate Release
Coil
Rated coil
code
voltage
voltage
voltage resistance power

VAC
VAC
VAC
Ω±10%
VA
23
24
18
3.6
145
1.8
25
60
45
9
950
1.8
26
110
83
16
3100
1.8
27
230
175
35
11400
1.8
28
240
185
36
13000
1.8
All figures are given for coil without pre-energization, at ambient temperature +23°C, 50Hz.
Other coil voltages on request.
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
Clearance/creepage
between contact and coil
Material group of insulation parts
Tracking index of relay base
2000V_rms
4000V_rms
≥8/8mm
IIIa
PTI250
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
1
Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-
terms of the disclaimer and all chapters of
tion, application notes and all specifications
the ‘Definitions’ section, available at
are subject to change.
http://relays.te.com/definitions