411-1050 Datasheet, PDF(1/5 Page) TE Connectivity Ltd

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

411-1050 Datasheet, PDF (1/5 Pages) TE Connectivity Ltd – CERTI-CRIMP Hand Tools

CERTI-CRIMP* Hand Tools

47386-4, 47387-7, and 525690-1

Instruction Sheet

411-1050

24 APR 15 Rev A

PROPER USE GUIDELINES

Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low

volume applications. A wide selection of powered application equipment for extended-use, production operations is available.

Wire Size Range

Stamped Here

Insulation Crimping

Adjustment Pins in

No. 3 Position

Ratchet

Color-Coded

Handles

Figure 1

1. INTRODUCTION

CERTI-CRIMP hand tools 47386-4, 47387-7, and 525690-1 are used to crimp PIDG* and PLASTI-GRIP*

terminals and splices onto a wire range size of 0.25-2.6 mm2 [22-14 AWG].

2. WIRE STRIPPING AND CRIMPING PROCEDURES

1. Strip the wire to the dimension listed in Figure 2. Strip length is determined by product to be crimped

and by wire size.

2. Open crimping jaws by closing handles until the ratchet releases. See Figure 1.

NOTE

Once the ratchet is engaged, the handles cannot be opened until they are fully closed.

3. Place the terminal in the crimping jaws as shown in Figures 3A, 3B, and 3C.

4. Place the PIDG-Nylon butt splices in crimping jaws as shown in Figure 4A.

NOTE

For crimping PLASTI-GRIP butt splices, the locator has to be removed from the tool as shown in Figure 4B.

5. Close handles until the terminal or splice is held firmly in place. Do not deform the terminal or splice

barrel. Make sure the terminal barrel rests against the locator.

6. Insert the stripped wire into the barrel. To complete the crimp, close the handles until the ratchet

release mechanism releases. Handles will open automatically and the crimped item may be removed.

7. To crimp the other half of the splice, remove it and reposition the uncrimped half in the tool and

repeat.

*Trademark

PRODUCT INFORMATION 1-800-522-6752

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.te.com.

TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.

1 of 5

▷