English
Language : 

408-9736 Datasheet, PDF (1/4 Pages) TE Connectivity Ltd – STRATO-THERM Die Head Assembly
STRATO-THERM* Die Head Assembly 
314915-1 for Use in Pneumatic 
Crimping Tool 69015
(2) Retaining
Pins 302563
(2)
Toggle
Links
302562
(6) Crescent
Rings 21045-8
Link 300114
Indenter †
314930-1
Stop
314933-1
STRATO-THERM
Die Head Assembly
314935-1
(2) Spacers
314936-1 Ring
302016
Rivet †
1-305678-5
Insulation †
Indenter
314932-1
Pivot Pin
300115
(Between Links)
Nest †
314929-1
Stop Bracket 314934-1
(2) Button Head Screws
2-21002-0, 8-32 X 6.4 [.25] Long
Toggle †
Lever 314935-1
Instruction Sheet
408-9736
19 DEC 11 Rev B
(4) External
Snap Rings
1-21048-6
Retaining Pin
8-59558-3
Pneumatic Crimping
Tool 69015
(2) Retaining
Pins 300042
Insulation †
Anvil 314931-1
Adjustment Pin
302015
Link 3-59649-1
Front of
Die Assembly
†These items must be replaced by TE Connectivity to ensure reliability of the tool. See Section 6.
Figure 1
1. INTRODUCTION
This instruction sheet covers the use and maintenance
of STRATO-THERM Die Head Assembly 314915-1.
The head assembly is used in Pneumatic Crimping
Tool 69015 to crimp size 12-10 AWG 
STRATO-THERM Terminals and Splices with
insulation barrel feature.
NOTE
i
All dimensions on this sheet are in millimeters
[followed by inches in brackets].

Read these instructions completely and understand
them before using the head assembly.
Reasons for reissue of this document are provided in
Section 7, REVISION SUMMARY.
2. DESCRIPTION (Figure 1)
The head assembly components include a nest and
indenter for crimping the product wire barrel, and an
insulation anvil and insulation indenter for crimping the
product insulation barrel. There is an adjustment pin
for the insulation crimp that can be placed in any of
three positions. Position 1 is for the smallest insulation
sizes and position 3 is for the largest.
©2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company TOOLING ASSISTANCE CENTER 1-800-722-1111 This controlled document is subject to change.
All Rights Reserved
PRODUCT INFORMATION 1-800-522-6752
For latest revision and Regional Customer Service,
*Trademark
visit our website at www.te.com
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.
1 of 4
LOC B