408-9623 Datasheet, PDF (1/3 Pages) TE Connectivity Ltd – Seating Tool 535072- 1 for Type C

Seating Tool 535072- 1 for Type C
Eurocard Receptacle Connectors
With ACTION PIN* Contacts
Side Plate
535084- 2
Push Plate
535081- 1
Compliant Pin
Area
Instruction Sheet
408- 9623
14 JUN 11 Rev E
Side Plate
535084- 1
Stabilizer
535082- 1 (Qty: 2)
ACTION PIN Contacts
Printed Circuit (PC) Board
Type C Eurocard
Receptacle Connector
(96- Position, 3- Row)
PC Board Support Fixture
(Customer Supplied)
Figure 1
1. INTRODUCTION
Seating Tool 535072--1 is used to seat Type C
Eurocard receptacle connectors with ACTION PIN
contacts onto the pc board. Read these instructions
carefully before using the seating tool.
Reasons for reissue of this instruction sheet are
provided in Section 7, REVISION SUMMARY.
NOTE
i
Dimensions on this instruction sheet are in metric
units [with U.S. customary units in brackets].
Figures are not drawn to scale.
2. DESCRIPTION (Figure 1)
The seating tool features a push plate, stabilizers,
and side plates. The push plate, located at the top of
the tool, provides the bearing surface for the
application tooling, which supplies the force to push
the contacts into the pc board holes.
The side plates hold 3 rows of 32 rectangular blades
which push on the respective connector contacts. The
side plates fit over the connector body to align the
components for proper seating.
3. REQUIREMENTS
3.1. PC Board Support (Customer Supplied)
A pc board support must be used to provide proper
support for the pc board and to protect the pc board
and connector from damage. Design the pc board
support fixture using the following recommendations:
S it should be larger than the pc board by
approximately 25.4 mm [1 in.] around all edges
of the pc board
S it should have a flat surface with a cutout at
least deep enough to allow adequate clearance
for the contact tails
E2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company
All Rights Reserved
*Trademark
TOOLING ASSISTANCE CENTER 1--800--722--1111 This controlled document is subject to change.
PRODUCT INFORMATION 1--800--522--6752
For latest revision and Regional Customer Service,
visit our website at www.te.com
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.
1 of 3
LOC B