408-8738 Datasheet, PDF (1/6 Pages) TE Connectivity Ltd – Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools

PRO-CRIMPER* III
Hand Crimping Tool
Assembly 790163-[ ]
Instruction Sheet
408-8738
11 FEB 15 Rev R
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low
volume applications. A wide selection of powered application equipment for extended-use, production operations is available.
PRO-CRIMPER III hand crimping tool is a “Commercial” grade
and is designed primarily for field installation, repair,
maintenance work, and prototyping in industrial, commercial, and
institutional applications. Product crimped with this tool will meet
the crimp height requirement for hand tools in the appropriate
application specification (114-series), but may not comply with
other feature parameters of the document. A variety of tools are
offered to satisfy performance requirements from
TE Connectivity. For additional information, contact the Tooling
Assistance Center at the number at the bottom of this page.
Die
Assembly
Moving Jaw
Complete Tool with Die Set
Includes TE JacKnack*
Tool 2119000-1
Ratchet
Adjustment
Wheel
Stationary
Jaw
Back of Tool
Pivot Pin
PRO-CRIMPER III
Hand Crimping Tool
Frame 354940-1
Stationary
Handle
TE HAND TOOL
W/DIE SET†
TE DIE SET
(ONLY)
790163-1
790163-3
790163-5
790163-2
790163-4
790163-6
790163-7
790163-8
790163-9
1-790163-0
MODULAR
PLUG●
336330-1, -2
336349-1
336462-1
1711413-1, -2
1933441-[ ]
1933442-[ ]
1933433-[ ]
1499598-[ ]
SIZE
(AWG)
26-24
26-24
26-24
24-23
28-22
CABLE (mm)
CONDUCTOR
INSULATION
DIAMETER
OUTSIDE
DIAMETER
5.0-6.0
0.80-1.00
5.0-6.0
6.0-7.0
0.80-1.00
0.89-1.09
4.7-5.3
0.89-1.09
1.12-1.22
7.0-7.9
†Includes 2119000-1 JacKnack Tool (Instruction Sheet 408-10326)
●For additional modular plug part numbers, contact PRODUCT INFORMATION at the bottom of this page.
Figure 1
Moving
Handle
STRIP
LENGTH
35.0 ±5.0
30.0 ±5.0
1. INTRODUCTION
PRO-CRIMPER III Hand Crimping Tool Assembly 790163-[ ] consists of PRO-CRIMPER III Hand Tool Frame
354940-1 and Die Assemblies listed in Figure 1.
The tool assembly is used to crimp the contacts, and the internal and external strain reliefs of the modular
plugs listed in Figure 1.
Read these instructions thoroughly before using the hand tool assembly.
NOTE
Dimensions in this instruction sheet are in millimeters. Figures and illustrations are for reference only and are not drawn to
scale.
© 2015 TE Connectivity family of companies
All Rights Reserved
*Trademark
TOOLING ASSISTANCE CENTER 1-800-722-1111
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com.
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
1 of 6