408-8734 Datasheet, PDF (1/6 Pages) TE Connectivity Ltd – Terminating Modules

Terminating Modules 791804-[ ] for Use with
Modular Plug Dual Terminators 1320840-[ ]
Modular Plug Dual Terminator
Automatic Circuit
Tester (Terminators
1320840-1 and
1320840-2 Only)
Instruction Sheet
408-8734
23 NOV 15 Rev E
Terminating Module
Stacked Contact
Inserters and Strain
Relief Stuffers
Plastic Guard
Module Nests
Foot Switch
Cable Assembly
Release
TERMINATING
MODULAR PLUG
MODULE
791804
CATEGORY PART NUMBER
TYPE
CABLE
WIRE INSULATION
DIAMETER (mm [in.])
OUTSIDE DIAMETER
(mm [in.])
WIRE SIZE
RANGE
(AWG)
5e EMT
336330-[ ]
336352-[ ]
UTP or FTP Stranded
00.80-1.0 [.031-.039]
0.89-1.09 [.035-.043]
5.0-6.0 [.197-.236]
26-24
-1
1375202-[ ] UTP Stranded
26-24
6
1711345-[ ] PiMF Stranded
00.80-1.0 [.031-.039] 5.0-6.0 [.197-.236]
1375204-[ ] UTP or FTP Solid
24-23
-2
5e EMT
336349-1 UTP or FTP Stranded 00.80-1.0 [.031-.039] 5.0-6.0 [.197-.236] 26-24
5e EMT
336462-[ ]
336643-[ ]
UTP or FTP Stranded
0.89-1.09 [.035-.043] 6.0-7.0 [.236-.276]
26-24
-3
1479184-[ ] UTP Stranded
26-24
6
1711346-[ ] PiMF Stranded
0.89-1.09 [.035-.043] 6.0-7.0 [.236-.276]
1479185-[ ] UTP or FTP Solid
24-23
5e EMT
1711413-[ ] UTP or FTP Stranded 00.80-1.0 [.031-.039]
26-24
-4
1933441-[ ] UTP Stranded
4.7-5.3 [.185-.208] 26-24
6
0.89-1.09 [.035-.043]
1933442-[ ] UTP Solid
24-23
EMT is electromagnetic technology UTP is unshielded twisted pair FTP is foil-wrapped shielded twisted pair PiMF is pairs in metal foil
Figure 1
The terminating module is designed to be used with the modular plug dual terminator (shown in Figure 1) to
terminate the modular plugs listed in Figure 1 to create a cable assembly. During termination, terminators
1320840-1 and 1320840-2 are capable of testing the cable assembly for electrical circuit continuity. Terminator
1320840-3 will not provide electrical circuit continuity testing. Read these instructions completely before using
the module.
For detailed information about the modular plug dual terminator, refer to customer manual 409-10010.
NOTE
Dimensions in this instruction sheet are in metric units [with U.S. customary units in brackets]. Figures are not drawn to scale.
© 2015 TE Connectivity family of companies
All Rights Reserved
*Trademark
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com.
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
1 of 6