408-8676 Datasheet, PDF (1/2 Pages) TE Connectivity Ltd – Production Torque Wrenches

Production Torque Wrenches
Instruction Sheet
408-8676
27 OCT 14 Rev G
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low
volume applications. A wide selection of powered application equipment for extended-use, production operations is available.
Open-End
Wrench Head
Torque Wrench
Protective Cover
TE
CONNECTIVITY
PART NUMBER
1055276-1
1055419-1
1055480-1
1055512-1
1055546-1
1055790-1
1055791-1
1055826-1
1055868-1
1061789-1
1490262-1
PREVIOUS
PART
NUMBER
2098-0351-54
2098-5065-54
2098-5304-54
2098-5619-54
2098-5830-54
2598-5026-54
2598-5027-54
2598-5160-54
2598-5298-54
7098-5031-54
2598-5383-50
WRENCH DESCRIPTION
Production Torque Wrench
For SMA (OSM) Type Connectors
For OSSM Type Connectors
For SMA (OSM) Hermetic Type Connectors
Production Torque Wrench Kit
For SC/N Type Connectors (Hex Nut Design)
For TNC Type Connectors (Hex Nut Design)
Production Torque Wrench
For TNC Type Connectors (Hex Nut Design)
For 7mm Type Connectors
Production Torque Wrench
Figure 1
WRENCH SIZE
mm
[inches]
PRESET TORQUE
6.4
7.9
6.4
7.1
6.4 and 8.0
20.6
15.9
4.0
14.3
19.1
7.9
1/4
5/16
1/4
9/32
1/4 and 5/16
13/16
5/8
5/32
9/16
3/4
5/16
14 in-lbs ±2 lb
8 in.-lbs +1.5/-.5 lb
5 in.-lbs ±.5 lb
30 in.-lbs ±2 lb
8 in.-lbs +1.5/-.5 lb
14 in.-lbs ±2 lb
14 in.-lbs ±2 lb
8 in.-lbs +1.5/-.5 lb
14 in.-lbs±2 lb
14 in.-lbs ±2 lb
15 in.-lbs ±2 lb
1. INTRODUCTION
These production torque wrenches are used to properly install or disassemble the connectors listed in Figure 1.
Figure 1 also contains the TE part numbers for the wrenches, the previous part numbers for the wrenches,
wrench size, and the preset torque for each wrench.
NOTE
Dimensions on this sheet are in metric units [with U.S. customary units in brackets], unless otherwise noted.
Reason for revision is provided in Section 5, REVISION SUMMARY.
2. DESCRIPTION
Each production torque wrench contains a protective cover, a torque wrench, and an interchangeable head.
Refer to Figure 2 for the appropriate replacement wrench head part numbers.
The wrenches are designed to be used in the clockwise or counterclockwise direction.
© 2014 TE Connectivity family of companies
All Rights Reserved
*Trademark
TOOLING ASSISTANCE CENTER 1-800-722-1111
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com.
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
1 of 2