408-8644 Datasheet, PDF (1/2 Pages) TE Connectivity Ltd – Reasons for reissue of this instruction sheet are provided in Section 6, REVISION SUMMARY.

HM-Zd Receptacle
Removal Tools 1583224-[ ]
Instruction Sheet
408-8644
03 JUL 14 Rev C
1. INTRODUCTION
HM-Zd Receptacle Removal Tools 1583224-[ ] are designed to be used in conjunction with HM-Zd Chicklet
Removal Tools 1583248-1 or 1583249-1 to remove 2- or 4-pair HM-Zd receptacles with 4, 6, 10, 12, 15, or 20
chicklets from the printed circuit (pc) board. See Figure 1.
TOOL
1583224-1
1583224-2
1583224-3
1583224-4
1583224-5
1583224-6
Figure 1
RECEPTACLE NUMBER OF CHICKLETS
10
12
15
20
4
6
The receptacle removal tool is used to remove the housing from the pc board, then the chicklet removal tool is
used to remove individual chicklets from the pc board. Read and understand these instructions before using
any of the removal tools.
NOTE
Dimensions in this instruction sheet are in millimeters [with inches in brackets]. Figures are not drawn to scale.
Reasons for reissue of this instruction sheet are provided in Section 6, REVISION SUMMARY.
2. DESCRIPTION
The removal tool features of a series of teeth that enter the square cavities on the top of the receptacle and
unlatch the latches securing the housing to the chicklets. Refer to Figure 2. When the chicklets are unlatched,
the housing can be removed from the pc board.
3. REMOVAL
1. Position the tool over the receptacle so the teeth are aligned with the square cavities. See Figure 2A.
2. Press down on the tool until it is flat on the housing. See Figure 2B.
3. Keeping the tool in place, grasp the housing at both ends, and lift the housing off of the chicklets.
NOTE
It may be necessary to “work” the housing off of the chicklets.
2A
HM-Zd Receptacle
Removal Tool
HM-Zd Receptacle
(2-Pair Shown)
Teeth
Housing
Square Cavities
Chicklets
2B Teeth of Tool in Square
Cavities of Receptacle
Tool Flat on
Housing
PC Board
Figure 2
© 2014 TE Connectivity family of companies
All Rights Reserved
*Trademark
TOOLING ASSISTANCE CENTER 1-800-722-1111
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com.
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
1 of 2