|
408-8547 Datasheet, PDF (1/4 Pages) TE Connectivity Ltd – CERTI-CRIMP II Straight Action Hand Tools | |||
|
CERTI- CRIMP* II Straight Action Hand Tools
Instruction Sheet
408- 8547
26 SEP 11 Rev J
1. INTRODUCTION
The CERTI--CRIMP II Straight Action Hand Tools are designed to crimp a variety of loose piece terminals.
NOTE
Refer to http://tooling.te.com/data.asp âDocumentationâ - âData Sheetsâ for a list of loose piece terminals that may be crimped by the
CERTI- CRIMP II Straight Action Hand Tool. The website also contains instructions in various languages.
CAUTION
The wire crimper bottoms against the anvil before the ratchet releases. This is a design feature that assures maximum electrical and
tensile performance of the crimp. Do NOT re- adjust the ratchet.
http://tooling.te.com/data.asp âDocumentationâ- âData Sheetsâ
1. INTRODUCTION
Les pinces à action directe CERTI--CRIMP II permettent de sertir différents types de cosses en vrac.
REMARQUE
La liste complète des cosses en vrac sertissables à lâaide de la pince à action directe CERTI- CRIMP II est consultable sur le
site http://tooling.te.com/data.asp âDocumentationâ - âData Sheetsâ Ce site comporte également des instructions dans
différentes langues.
ATTENTION
Le poinçon du fil vient en butée contre lâenclume avant le déblocage de la crémaillère CERTI- CRIMP. Cette fonctionnalité
permet dâassurer des performances de sertissage optimales tant sur le plan électrique que sur celui de la tenue en traction du
fil. NE PAS retoucher au réglage de la crémaillère.
http://tooling.te.com/data.aspâDocumentationâ-âData Sheetsâ
1. EINFÃHRUNG
Die CERTI--CRIMP II Handzange ist dazu vorgesehen, unterschiedliche Klemmen zu crimpen.
ANMERKUNG Siehe http://tooling.te.com/data.asp âDocumentationâ - âData Sheetsâ für eine Aufstellung von LP- Kontakte, die mit der
CERTI- CRIMP Handzange gecrimpt werden können. Die Website enthält auch Anleitungen in verschiedenen Sprachen.
VORSICHT
Das Werkzeugoberteil fährt immer auf Block mit den AmboÃ, bevor die CERTI- CRIMP Handzange die Ratsche freigibt. Dies
ist ein Konstruktionsmerkmal, welches maximale Verpressung und Zugfestigkeit des Crimp- Kontaktes gewährleistet. Die
Ratsche darf nicht verstellt werden.
1. INTRODUZIONE
Gli attrezzi manuali CERTI--CRIMP II Straight Action sono progettati per aggraffare vari tipi di terminali sciolti.
NOTA
Per la lista dei terminali sciolti che possono essere aggraffati con lâattrezzo manuale CERTI- CRIMP II Straight Action,
consultare il sito multilingua http://tooling.te.com/data.asp âDocumentationâ - âData Sheetsâ.
ATTENZIONE
Prima del rilascio del cricchetto, la matrice di aggraffatura è appoggiata sullâincudine. Tale condizione garantisce prestazioni ottimali
dellâaggraffatura in termini di elettricità e tensione. NON modificare la regolazione del cricchetto.
E2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company
All Rights Reserved
*Trademark
TOOLING ASSISTANCE CENTER 1--800--722--1111 This controlled document is subject to change.
PRODUCT INFORMATION 1--800--522--6752
For latest revision and Regional Customer Service,
visit our website at www.te.com
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.
1 of 4
LOC B
|
▷ |