408-8465 Datasheet, PDF (1/3 Pages) TE Connectivity Ltd – Read these instructions and understand them before using the seating tool.

Seating Tools 91346-[ ] 
for Z-PACK* 2mm HM (Hard Metric),
Type A/B Pin Headers
Seating Tools
91346-[ ]
Instruction Sheet
408-8465
04 OCT 11 Rev A
Adapter
Blade
Typical Z-PACK 2mm
HM Pin Header
Printed Circuit
Board (Ref)
ACTION PIN* Contact
Board Retention Feature
Printed Circuit Board
Support Fixture
(Customer Supplied)
Figure 1
1. INTRODUCTION
2. DESCRIPTION
This instruction sheet covers the use and maintenance
of Seating Tools 91346-[ ].
These tools are used to seat Z-PACK 2mm HM (hard
metric) 5-row and 5-row +2 Type A/B pin headers
onto a printed circuit (pc) board. These headers
contain ACTION PIN contacts to allow solderless pc
board installation. See Figure 1.
Read these instructions and understand them before
using the seating tool.
NOTE
i
Dimensions in this instruction sheet are in metric
units [with U.S. customary units in brackets].
Figures are not drawn to scale.
Each seating tool is an assembly of a blade and an
adapter. Figure 2 matches tool part number to the size
(positions) of the pin header to be seated. The adapter
straightens the header, during the cycle of the
applicator ram, to provide proper insertion into the pc
board. Each tool is designed for a specific combination
of contacts in a row and number of rows in a header.
During seating, the tool sits inside the header housing
with the blades engaging the housing floor and contact
shoulders, preventing contacts from pushing out of 
the housing.
©2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company TOOLING ASSISTANCE CENTER 1-800-722-1111 This controlled document is subject to change.
All Rights Reserved
PRODUCT INFORMATION 1-800-522-6752
For latest revision and Regional Customer Service,
*Trademark
visit our website at www.te.com
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.
1 of 3
LOC B