408-8457 Datasheet, PDF (1/2 Pages) TE Connectivity Ltd – GP and TR Series Control Relays



GP and TR Series Control Relays
Instruction Sheet
408-8457
17 OCT 11 Rev B
1. INTRODUCTION
This instruction sheet covers mounting and wiring
information for the AGASTAT* GP and TR Series
Control Relays (see Figure 1). Read these instructions
thoroughly before mounting the relay.
NOTE
i
Dimensions in this instruction sheet are in
millimeters [with inches in brackets]. Figures are
not drawn to scale.
2. DESCRIPTION
Each relay is an accurate instrument using a minimum
of moving parts. When satisfactory performance
cannot be restored, the unit should be returned to 
TE Connectivity for repair or replacement.
See Figure 2 for mounting hardware.

GP Series Terminal Diagram
DC
AC
TR Series Terminal Diagram
AC and DC
Figure 1
©2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company TOOLING ASSISTANCE CENTER 1-800-722-1111 This controlled document is subject to change.
All Rights Reserved
PRODUCT INFORMATION 1-800-522-6752
For latest revision and Regional Customer Service,
*Trademark
visit our website at www.te.com
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.
1 of 2
LOC B