408-7235 Datasheet, PDF (1/4 Pages) TE Connectivity Ltd – CERTI-CRIMP Hand Crimping Tools

CERTI-CRIMP* Hand Crimping Tools
90165-1, 90166-1, and 90166-2
Instruction Sheet
408-7235
26 SEP 11 Rev H
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use
and low volume applications. A wide selection of powered application equipment for extended-use, production operations is available.
Crimping Chamber
Letter Markings
Indenter Jaw
Back Side of Tool
Ratchet
Locator
Anvil Jaw
Insulation
Adjustment Pin
Link
PART NUMBER
90165-1
90166-1
90166-2
TOOL
CRIMPING CHAMBER
LETTER MARKING
A
B
A
B
A
B
WIRE
INSULATION DIAMETER
RANGE (mm [in.])
3.05-4.32 [.120-.170]
1.52-2.54 [.060-.100]
2.29-3.30 [.090-.130]
---
2.16-3.18 [.085-.125]
SIZE (AWG)
18
16-14
22-18
Figure 1
1. INTRODUCTION
CERTI-CRIMP Hand Crimping Tools 90165-1,
90166-1, and 90166-2 are designed to crimp
FASTON* 250 Series Premier Line receptacles onto
wire sizes 22 through 14 AWG. Refer to Figure 1.
Catalog 82004 provides a guide for wire-to-receptacle
selection. For wire sizes and receptacles not listed,
contact PRODUCT INFORMATION at the number at
the bottom of this page for recommendation.
Read these instructions thoroughly before using the
hand tool.
NOTE
i
Dimensions in this instruction sheet are in metric
units [with U.S. customary units in brackets].
Figures and illustrations are for reference only and
are not drawn to scale.
Reasons for reissue of this instruction sheet are
provided in Section 7, REVISION SUMMARY.
2. DESCRIPTION
Each hand tool features two jaws (anvil and indenter),
a locator, an insulation adjustment pin, and a ratchet.
When closed, the jaws form two crimping chambers
©2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company
All Rights Reserved
*Trademark
TOOLING ASSISTANCE CENTER 1-800-722-1111
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.
1 of 4
LOC B