English
Language : 

408-4523 Datasheet, PDF (1/1 Pages) TE Connectivity Ltd – Extraction Tool


Extraction Tool 90471-1
Wires
Instruction Sheet
408-4523
25 JUL 11 Rev A
SL-156 Connector Housing
Locking Lance of SL-156
Receptacle Contact
Locking Lance Slot
Stop
Extraction Tool
Tip
Figure 1
1. INTRODUCTION
Extraction Tool 90471-1 extracts an individual SL-156
Receptacle Contacts 770476-[ ] from SL-156
Connector Housing 770849-[ ]. See Figure 1 for an
SL-156 receptacle contact and connector housing.
NOTE
i
The illustration is for identification only and is not
drawn to scale.

Reasons for reissue of this instruction sheet are
provided in Section 5, REVISION SUMMARY.
2. DESCRIPTION (See Figure 1)
The tip of the extraction tool is designed to enter the
locking lance slot of the connector and depress the
contact locking lance. The tool stop prevents contact
damage due to over-insertion of the extraction tool.
3. EXTRACTION PROCEDURE
1. Position the extraction tool as shown in Figure 1.
Insert the tip straight into the connector locking
lance slot of the contact to be removed until the tool
stop bottoms on the connector housing.
2. Grasp the wire of the contact being removed, and
pull the contact out of the connector.
NOTE
i
Do not re-insert the removed contact into the
connector.

3. Remove the tool straight from the connector.
4. MAINTENANCE AND INSPECTION
To ensure proper operation, it is recommended that
the tool be inspected immediately on its arrival and at
regularly scheduled intervals. The tool is not
repairable and should be replaced when worn or
damaged. It is recommended that the tool be stored in
a clean, dry place and cleaned with a soft, lint-free
cloth.
Additional tools can be purchased from:
CUSTOMER SERVICE (038-035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105-3608
5. REVISION SUMMARY
Revisions to this instruction sheet include:
• Changed company logo
• Added Original Instructions
©2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company TOOLING ASSISTANCE CENTER 1-800-722-1111 This controlled document is subject to change.
All Rights Reserved
PRODUCT INFORMATION 1-800-522-6752
For latest revision and Regional Customer Service,
*Trademark
visit our website at www.te.com
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.
1 of 1
LOC B