408-4345 Datasheet, PDF (1/5 Pages) TE Connectivity Ltd – PRO-CRIMPER III Hand Crimping

PRO-CRIMPER* III Hand Crimping
Tool Assembly 58606-1
with Die Assembly 58606-2
Instruction Sheet
408-4345
03 DEC 15 Rev B
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low
volume applications. A wide selection of powered application equipment for extended-use, production operations is available.
Locator Assembly
(Supplied with Die
Assembly)
Stationary Jaw
Back of Tool Frame
(Wire Side)
Front of Tool
(Locator Side)
Die Assembly
Tool Marking 4
Pivot Pin
PRO-CRIMPER III Hand Tool
Frame 354940-1 (408-9930)
Terminal
Support
Moving Jaw
Ratchet Adjustment
Wheel
Stationary Handle
primarily for field installation, repair,
maintenance work, or prototyping in industrial, commercial, or
institutional applications. Product crimped with this tool will meet the
crimp height requirement for hand tools in the appropriate Application
Specification (114-series), but may not comply with other feature
parameters of the specification. TE Connectivity offers a variety of
tools to satisfy your performance requirements. For additional
information, contact PRODUCT INFORMATION at 1-800-522-6752.
Moving Handle
DIE
ASSEMBLY
PART NO.
LOCATOR
ASSEMBLY
PART NO.
TOOL
NEST
COLOR
CODE
Blue
58606-2
2063771-1 Yellow
Red
WIRE
SIZE
(mm²)
1.5
2.5
1.0
INSULATION
RANGE FOR
SEAL
TERMINAL AND SEAL INFORMATION
1.5 mm CONTACT 2.5 mm CONTACT
TERMINAL SEAL TERMINAL SEAL
NO.
NO.
NO.
NO.
STRIP
LENGTH
CRIMP
HEIGHT
(±0.05
[±.002])
2.2-3.0
1703018-[ ]
962999-[ ]
828905-1
962972-[ ]
962982-[ ]
828921-1
5.1-5.9
1.68
[.0660]
1.97
[.0775]
1.2-2.1
962992-[ ]
962998-[ ]
828904-1
962971-[ ]
962981-[ ]
828920-1
3.8-4.6
1.45
[.0570]
Figure 1
1. INTRODUCTION
PRO-CRIMPER III Hand Tool Assembly 58606-1 consists of Die Assembly 58606-2 and PRO-CRIMPER III
Hand Tool Frame 354940-1. The die assembly consists of crimping dies and a locator assembly. Refer to
Section 11, REVISION SUMMARY, for reason for revision.
NOTE
Dimensions on this sheet are in millimeters [with inch equivalents provided in brackets]. Figures and illustrations are for
identification only and are not drawn to scale.
© 2015 TE Connectivity family of companies
All Rights Reserved
*Trademark
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com.
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
1 of 5