408-32224 Datasheet, PDF (1/4 Pages) TE Connectivity Ltd – Read and understand these instructions before using the removal tools.

Removal Knob
Removal Kits 2215035-[ ]
for STRADA Whisper* Headers
Wedge
Block
Swage
Screws
Instruction Sheet
408-32224
11 DEC 15 Rev A
Clamp
Subassembly
Pusher
Block
Swage Block
Swage
Subassembly
Clamp
Screws
REMOVAL KIT NUMBER
2215035-1
2215035-2
WILL REMOVE
6 Pair x 3 Col Headers
Figure 1
PRODUCT PART NUMBERS
2187541-1
1. INTRODUCTION
Removal Kits 2215035-[ ] are designed to remove STRADA Whisper Headers from printed circuit (pc) boards.
Refer to Figure 1.
Read and understand these instructions before using the removal tools.
NOTE
Dimensions on this sheet are in metric units [with U.S. customary units in brackets]. Figures and illustrations are for reference
only and are not drawn to scale.
2. DESCRIPTION
Each kit consists of two swage subassemblies, one clamp subassembly, one pusher block, on removal knob,
and two separation screws. The swage subassemblies consists of a swage block, a wedge block, and two
swage screws. The clamp subassembly consists of two side clamp blocks and two clamp screws.
The swage subassemblies grip the header by swaging the tops of the header c-pins. The clamp subassembly
grips the sides of the header to allow the swage subassembly to provide the swaging action. As a user tightens
the removal knob on the pusher block, the swage subassembly is pulled away from the pc board. The
separation screws allow a user to remove the header from the swage block after removal from the pc board.
3. OPERATION
3.1. Tool Preparation
To prepare the removal tool, first determine the dimensions of the header, (number of rows and columns). To
prepare the tool:
1. Select the kit part number to be used based on the header number or size.
2. Select the proper swage subassembly for the receptacle part number or size.
© 2015 TE Connectivity family of companies
All Rights Reserved
*Trademark
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com.
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
1 of 4