English
Language : 

408-32208 Datasheet, PDF (1/4 Pages) TE Connectivity Ltd – Small Form-Factor Pluggable
Small Form-Factor Pluggable (QSFP
Behind Bezel, Customized Heat Sink)
Cage Assembly Seating Tool 2215032-[ ]
Instruction Sheet
408-32208
19 OCT 15 Rev A
Printed Circuit
(PC) Board (Ref)
Back of
Seating Tool
1 X 6 Seating Tool
(Bottomed on Cage Assembly)
1 X 6 Cage Assembly
2143331-7
Compliant
Pin Contact
1 X 6 Wall Support
(For Clarity, Not Shown Installed)
PC Board Support
Fixture (Ref)
SEATING
TOOL KIT
QSFP CAGE ASSEMBLY
CONFIGURATION
APPLICATION
SPECIFICATION
REPLACEMENT WALL
SUPPORT
CAGE ASSEMBLY
CONFIGURATION
2215032-1
1X6
2-2215032-1
1X6
2215032-2
1X3
114-13120
2-2215032-2
1X3
2215032-3
1X4
2-2215032-3
1X4
1. INTRODUCTION
Figure 1
QSFP cage assembly seating tool listed in Figure 1 is used to seat the cage assembly described in Figure 1
onto the pc board. The cage assembly contains compliant pin contacts to allow solderless pc board installation.
Read these instructions thoroughly before using the seating tool kit.
NOTE
Dimensions on this sheet are in metric units [with U.S. customary units in brackets]. Figures and illustrations are for reference
only and are not drawn to scale.
2. DESCRIPTION (Figure 1)
Each seating tool consists of a seating tool and a wall support. The seating tool has cutouts (two located on
each side) to accept the protruding part of the standoffs of the cage assembly. The wall support must be
installed into the ports of the cage assembly.
The top of the seating tool provides a surface to accept the force applied by the application tool to seat the
product onto the pc board. During seating, the back and sides of the seating tool protect the cage assembly
from damage. The wall support supports the individual ports of the cage assembly.
3. REQUIREMENTS
3.1. PC Board Support Fixture (Customer Supplied)
A pc board support must be used to provide proper support for the pc board and to protect the pc board and
the connector and cage assembly from damage. The support fixture must be designed for specific needs using
the following recommendations:
© 2015 TE Connectivity family of companies
All Rights Reserved
*Trademark
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com.
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
1 of 4