408-32181 Datasheet, PDF (1/5 Pages) TE Connectivity Ltd – Small Form-Factor Pluggable (SFP Style) Extraction Tool Kit

Small Form-Factor Pluggable
(SFP Style) Extraction Tool Kit
2215067-[ ] Cage Assemblies
Instruction Sheet
408-32181
19 FEB 16 Rev B
Extraction Tool
Printed Circuit
(PC) Board (Ref)
Wall Supports
Top Push Plate
1 X 6 SFP+ Cage
Assembly 2170509-1
Base Plate
Finger Mounting Block
EXTRACTION TOOL
2215067-1
2215067-2
2215067-3
2215067-4
2215067-5
2215067-6
2215067-7
2215067-8
2215067-9
1-2215067-0
CAGE ASSEMBLY CONFIGURATION
1 X 6 (SFP+ External EMI Springs with Light Pipes)
1 X 1 (SFP with Light Pipes)
1X2
1X3
1X4
1X5
1X7
1X8
1 X 4 (SFP+ Enhanced, EMI Gasket with Heat Sink & Light Pipes)
1 X 1 (SFP+ External EMI Springs with Heat Sink & Light Pipes)
Figure 1
1. INTRODUCTION
SFP Style Extraction Tool Kits 2215067-[ ] are used to remove the printed circuit (pc) board from SFP
connector and cage assemblies with external EMI springs and heat sinks and light pipes described in Figure 1.
The cage assemblies contain press-fit contacts. Read these instructions thoroughly before using the extraction
tool kit.
NOTE
Dimensions on this sheet are in metric units [with U.S. customary units in brackets]. Figures and illustrations are for reference
only and are not drawn to scale.
© 2016 TE Connectivity family of companies
All Rights Reserved
*Trademark
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com.
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
1 of 5