408-32163 Datasheet, PDF (1/4 Pages) TE Connectivity Ltd – Enhanced Small Form-Factor

Enhanced Small Form-Factor
Pluggable (SFP+) Extraction Tool Kit
2215058-[ ] Cage Assemblies
Cutout (2 Plc)
Extraction Tool
Instruction Sheet
408-32163
09 FEB 15 Rev A
Printed Circuit
(PC) Board (Ref)
Top Push Plate
Wall Supports
1 X 5 QSFP SFP+ Cage
Assembly 2284170-1
Base Plate
Finger Mounting Block
EXTRACTION TOOL
2215058-1
2215058-2
2215058-3
2215058-4
2215058-5
2215058-6
ENHANCED SFP+ CAGE ASSEMBLY CONFIGURATION
1X1
1X2
1X3
1X4
1X5
1X6
Figure 1
1. INTRODUCTION
Enhanced SFP+ Extraction Tool Kits 2215058-[ ] are used to remove the printed circuit (pc) board from
Enhanced SFP+ connector and cage assemblies described in Figure 1. The cage assemblies contain press-fit
contacts. Read these instructions thoroughly before using the extraction tool kit.
NOTE
Dimensions on this sheet are in metric units [with U.S. customary units in brackets]. Figures and illustrations are for reference
only and are not drawn to scale.
2. DESCRIPTION
Each extraction tool kit consists of an extraction tool, a top push plate, base plate, and wall supports (one for
each stacked row of the cage assembly).
The base plate features a finger mounting block that holds up to six wall supports to the base plate. See
Figure 1. The top push plate is designed to be installed onto the upper tooling and the base plate is designed to
be installed onto the lower tooling of the application tool. The extraction tool has cutouts (one located on each
side) to accept the protruding part of the cage assembly. Each “finger” of a wall support fits into a port of the
cage assembly.
© 2015 TE Connectivity family of companies
All Rights Reserved
*Trademark
TOOLING ASSISTANCE CENTER 1-800-722-1111
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com.
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
1 of 4