English
Language : 

408-32120 Datasheet, PDF (1/7 Pages) TE Connectivity Ltd – EYE Check Terminal Alignment Aid
EYE Check* Terminal Alignment Aid
Instruction Sheet
408-32120
05 JUN 15 Rev C
1. INTRODUCTION
EYE Check terminal alignment aid is a tool used to help adjust the terminal front feed position in an applicator.
It consists of a software program, which supports both Microsoft Windows and Apple Mac OS X operating
systems, and a camera assembly designed to attach to TE Ocean, HDM, and HDI side-feed applicators, and
crimp quality monitor (CQM) II on a bench terminator. The applicators have a space behind the terminal
support for the camera.
Reasons for re-issue of this instruction sheet are provided in Section 6, REVISION SUMMARY.
2. SYSTEM MINIMUM REQUIREMENTS
2.1. Microsoft Operating System
Software
— Windows XP Service Pack 2 or later, 32 bit
— Windows Vista, 32 bit
— Windows 7, 32 or 64 bit
— Windows 8 is compatible, but not supported
Hardware
— 512 MB system memory
2.2. Apple Operating System
Software
— Mac OS X 10.6 or newer
Hardware
— Intel Core 2 Duo or higher data processor
— 512 MB system memory
— at least one available USB 2.0 or 3.0 port
2.3. Data Processor
— GHz or faster
— at least one available USB 2.0 or 3.0 port
3. INSTALLATION
3.1. Software
Windows Software
Run the Setup-AppCam.exe program from the installation CD. Refer to Figure 1. If a different installation
folder is desired, select the folder to install the program to by clicking the Browse button. Click Install.
Mac OS X Software
1. Open the AppCam.dmg file on the CD.
2. Drag the AppCam.app icon to the Application folder as shown in Figure 1.
Microsoft, Windows, Windows XP, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Apple, Mac, and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.
Intel Core is a trademark of Intel Corporation in the U.S. and/or other countries.
© 2015 TE Connectivity family of companies
All Rights Reserved
*Trademark
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com.
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
1 of 7