408-32084 Datasheet, PDF (1/5 Pages) TE Connectivity Ltd – Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools

SDE-SA Commercial Hand
Tools 2217208-1 and 2217267-1
for PTL Connectors
Instruction Sheet
408-32084
30 OCT 14 Rev B
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low
volume applications. A wide selection of powered application equipment for extended-use, production operations is available.
Locking Nut
Locator
Wire Crimper
(Upper Die)
Insulation Crimper
(Upper Die)
Stationary
Jaw
Moving
Jaw
Die Set
2217208-2 or
2217267-2
Handle
Emergency
Ratchet
Release
Die Retaining
Screws
Pins (4)
Anvil (Lower)
Wire Die
Anvil (Lower)
Insulation Die
Ratchet
Adjustment
Wheel
CRIMP TOOLING
SDE-SA
DIE
TOOL ASSY ONLY
2217208-1 2217208-2
PTL
TERMINAL
1971783-1
1971783-2
1971784-1
1971784-2
2217267-1
2217267-2
1971785-[ ]
1971786-[ ]
1971237-[ ]
1971238-[ ]
1. INTRODUCTION
CABLE
WIRE SIZE
mm² [in.]
NUMBER OF
CONDUCTORS
1.27 [16]
0.89 [18]
1
0.56 [20]
0.56 [20]
1
0.34 [22]
2 X 0.56 [2 X 20]
2
Figure 1
WIRE INSULATION mm² [in.]
DIAMETER
STRIP
LENGTH
3.30-3.3 [.118-.130]
2.65-2.95 [.104-.116]
2.40-2.70 [.095-.106]
2.40-2.70 [.095-.106]
4.5 ±0.3 [.177 ±.012]
2.25-2.45 [.088-.096]
2.40-2.70 [.095-.106]
SDE-SA Commercial Hand Tool Assemblies 2217208-[ ] and 2217267-[ ] for the PTL (Power Triple Lock)
connectors consists of the tool and die set shown in Figure 1. The tool consists of the SDE-SA Frame
Assembly 9-1478240-0 (Instruction Sheet 408-8851) and die assembly listed in Figure 1. This tool is used to
crimp the terminal numbers provided in the table in Figure 1.
NOTE
Dimensions in this instruction sheet are in millimeters with [inches in brackets]. Figures and illustrations are for reference only
and are not drawn to scale.
Read these instructions thoroughly before crimping connectors.
2. DESCRIPTION
The tool frame features two jaws, a handle, ratchet adjustment wheel, and an emergency ratchet release.
© 2014 TE Connectivity family of companies
All Rights Reserved
*Trademark
TOOLING ASSISTANCE CENTER 1-800-722-1111
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com.
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
1 of 5