English
Language : 

408-10414 Datasheet, PDF (1/5 Pages) TE Connectivity Ltd – The CERTI--CRIMP II Straight Action Hand Tools are designed to crimp a variety of loose piece terminals
CERTI- CRIMP* II
Straight Action Hand
Tools with Flip Locator
4I0ns8tru-c1tio0n 4Sh1e4et
13 JAN 14 Rev C
1. INTRODUCTION
The CERTI--CRIMP II Straight Action Hand Tools are designed to crimp a variety of loose piece terminals.
NOTE
Refer to http://tooling.te.com/data.asp “Documentation” - “CERTI- CRIMP Data Sheets” for a list of loose piece terminals that may be
crimped by the CERTI- CRIMP II Straight Action Hand Tool. The website also contains instructions in various languages.
CAUTION
The wire crimper bottoms against the anvil before the CERTI- CRIMP ratchet control releases. This is a design feature that assures
maximum electrical and tensile performance of the crimp. Do NOT re- adjust the ratchet.
http://tooling.te.com/data.asp “Documentation” - “CERTI-CRIMP Data Sheets”
1. INTRODUCTION
Les pinces à action directe CERTI--CRIMP II permettent de sertir différents types de cosses en vrac.
REMARQUE
La liste complète des cosses en vrac sertissables à l’aide de la pince à action directe CERTI- CRIMP II est consultable sur le
site http://tooling.te.com/data.asp “Documentation” - “CERTI- CRIMP Data Sheets” Ce site comporte également des
instructions dans différentes langues.
ATTENTION
Le poinçon du fil vient en butée contre l’enclume avant le déblocage de la crémaillère CERTI- CRIMP. Cette fonctionnalité
permet d’assurer des performances de sertissage optimales tant sur le plan électrique que sur celui de la tenue en traction du
fil. NE PAS retoucher au réglage de la crémaillère.
http://tooling.te.com/data.asp
“Documentation” - “CERIT-CRIMP Data Sheets”
1. EINFÜHRUNG
Die CERTI--CRIMP II Handzange ist dazu vorgesehen, unterschiedliche Klemmen zu crimpen.
ANMERKUNG
Siehe http://tooling.te.com/data.asp “Documentation” - “CERTI- CRIMP Data Sheets” für eine Aufstellung von LP- Kontakte, die mit
der CERTI- CRIMP Handzange gecrimpt werden können. Die Website enthält auch Anleitungen in verschiedenen Sprachen.
VORSICHT
Das Werkzeugoberteil fährt immer auf Block mit den Amboß, bevor die CERTI- CRIMP Handzange die Ratsche freigibt. Dies
ist ein Konstruktionsmerkmal, welches maximale Verpressung und Zugfestigkeit des Crimp- Kontaktes gewährleistet. Die
Ratsche darf nicht verstellt werden.
1. INTRODUZIONE
Gli attrezzi manuali CERTI--CRIMP II Straight Action sono progettati per aggraffare vari tipi di terminali sciolti.
NOTA
Per la lista dei terminali sciolti che possono essere aggraffati con l’attrezzo manuale CERTI- CRIMP II Straight Action,
consultare il sito multilingua http://tooling.te.com/data.asp “Documentation” - “CERTI- CRIMP Data Sheets”.
ATTENZIONE
Prima del rilascio del cricchetto, la matrice di aggraffatura è appoggiata sull’incudine. Tale condizione
dell’aggraffatura in termini di elettricità e tensione. NON modificare la regolazione del cricchetto.
garantisce
prestazioni
ottimali
. 2014 TE Connectivity Ltd. family of companies
TOOLING ASSISTANCE CENTER 1- 800- 722- 1111
All Rights Reserved
PRODUCT INFORMATION 1- 800- 522- 6752
TE logo and Tyco Electronics are trademarks. *Trademark
Other products, logos, and company names might be trademarks of their respective owners.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com
1 of 5
LOC B